Évaluations - 3, GPA: 5
(
)
)
|
Photos et spécifications Sony DAV-SB300 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
However, some leakage may occur, as a high-strength magnet is employed. If the subwoofer is used with a CRT-based TV or projector, install the subwoofer at least 0.3 meter from the TV set. If it is installed too close, color irregularity may occur on the screen. If color irregularity occurs, turn off the TV set once, then turn it on after 15 to 30 minutes. If color irregularity occurs again, place the subwoofer farther away from the TV set. If color irregularity still occurs after performing the above, make sure that no magnetic object is placed near the subwoofer. Color irregularity may occur as a result of interaction between the subwoofer and the magnetic object. Examples of possible sources of magnetic interference include: magnetic latches on a TV stand, etc., healthcare devices, toys, etc. Specifying the speaker parameters To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the level and balance. Use the test tone to adjust the speaker level and balance to the same level. Select [SPEAKER SETUP] in the setup display. For details, see “Setting for the Speakers” (page 67). Getting Started 21GB Playing Discs Playing Discs Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operation details supplied with your disc. "/1 Adjust the volume STANDBY A FUNCTION Connect Disc tray H indicator headphone "/1 Z FUNCTION H x 1 2 3 4 5 8 0 6 7 10 9 1 Turn on your TV. 2 Switch the input selector on the TV to this system. 3 Press "/1. The system turns on. Unless the system is set to “DVD,” press FUNCTION to select “DVD.” 4 Press A on the system or Z on the remote. “OPEN” appears in the front panel display and the system is ready for loading the disc. 5 Place a disc with the label side up on the disc tray. Press A on the system or Z on the remote again to close the disc tray. When you play an 8 cm disc, place it on the inner circle of the tray. Be careful that the disc is not skewed on the inner circle of the tray. 6 Press H. The system starts playback (continuous play). Adjust the volume on the system. After following Step 6 Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. (DVD: page 25), (VIDEO CD: page 25). To remove the disc Press A on the system or Z on the remote. Remove the disc after it is ejected from the system. “OPEN” appears in the front panel display. To turn on the system Press "/1. 22GB To turn off the system Press "/1. The system enters standby mode and the STANDBY indicator lights up in red. To turn off the system completely, remove the AC power cord (mains lead) from wall outlet (mains). While playing a disc, do not turn off the system by pressing "/1. Doing so may cancel the menu settings. When you turn off the system, first press x to stop playback and then press "/1. To save the power in standby mode Press "/1 while the system turns on (the STANDBY indicator on the system lights up). To cancel standby mode Press "/1 once. Additional operations 1 2 3 4 5 8 0 6 7 10 9 MUTING ./> X x H VOLUME +/– To Press Stop x Pause* X Resume play after pause X or H Go to the next chapter, > track, scene, or file in continuous play mode Go back to the preceding . chapter, track, scene, or file in continuous play mode Mute the sound MUTING. To cancel muting, press it again or VOLUME + to adjust the sound volume. * You cannot pause during JPEG playback. Notes • If there is no disc in the system, “NO DISC” appears in the front panel display. • If DVD playback is paused for approximately one hour, the system automatically turns off. Tip If a DVD has more than two titles, you cannot go to the next title or go back to the preceding title by pressing . or >. These buttons work only within a single title. If you want to go to the next title or go back to preceding title, press DVD TOP MENU or DVD MENU and then select the title you want to go to from the control menu. Playing Discs 23GB Resuming Playback from the Point Where You Stopped the Disc (Resume Play) When you stop the disc, the system remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the system enters standby mode by pressing "/1. x H 4 5 8 0 6 7 10 9 1 While playing a disc, press x to stop playback. “RESUME” appears in the front panel display, so you can restart the disc from the point where you stopped the disc. If “RESUME” does not appear, Resume Play is not available. 2 Press H. The system starts playback from the point where you stopped the disc in Step 1. Notes • You cannot perform Resume Play during Shuffle Play or Program Play. • Depending on where you stop the disc, the system may not resume playback from exactly the same point. • The point where you stopped playing is cleared if: – you change the play mode. – you change th...