Évaluations - 2, GPA: 3.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Home cinéma - HTR-6100 (94.9 kb)
Home cinéma - HTR-6100 (2.28 mb)
Home cinéma - HTR-6100 (2.3 mb)
Facilité d'utilisation
x EFCT. XXX (Effect level) Initial setting: STD Lets you adjust the “presence” of the surround effect. 26GB Resetting sound fields to the initial settings Use the buttons on the receiver for the operation. 1 Press ?/1 to turn off the power. 2 While holding down SOUND FIELD, press ?/1. “SF. CLR.” appears in the display and all sound fields are reset to the initial setting. Adjusting the tone You can adjust the tonal quality (bass, treble level) of the front speaker using the TONE menu. 1 Start playing a source encoded with multi channel surround effects (DVD, etc.). 2 Press MAIN MENU repeatedly to select “TONE”. 3 Press or repeatedly to select the parameter you want to adjust. For details, see “TONE menu parameters” below. 4 While monitoring the sound, press or repeatedly to select the setting you want. The setting is entered automatically. 5 Repeat steps 3 and 4 to adjust the other items. Notes • You cannot adjust the tone when the receiver is decoding signals with a sampling frequency of more than 48 kHz. • You also cannot adjust the tone when you select a sound field for movies and music (page 24, 25). TONE menu parameters x BASS XX dB (Front speaker bass level) x TREB. XX dB (Front speaker treble level) Initial setting: 0 dB You can adjust from –6 dB to +6 dB in 1 dB steps. Advanced Adjustments and Settings 27GB Advanced settings Using the SET UP menu to adjust the receiver You can adjust various receiver settings using the SET UP menu. 1 Press MAIN MENU repeatedly to select “SET UP ”. 2 Press or repeatedly to select the parameter you want to adjust. For details, see “SET UP menu parameters” below. 3 Press or repeatedly to select the setting you want. The setting is entered automatically. 4 Repeat steps 2 and 3 to adjust the other items. SET UP menu parameters The initial setting is underlined. x DVD-XXXX (Audio input mode for DVD input) Lets you select the audio input mode for DVD input. • AUTO Gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected. •OPT Specifies the digital audio signals input to the DIGITAL DVD OPT IN jack. • COAX Specifies the digital audio signals input to the DIGITAL DVD COAX IN jack. • ANLG Specifies the analog audio signals input to the DVD AUDIO IN (L/R) jacks. x TV-XXXX (Audio input mode for TV/SAT input) Lets you select the audio input mode for TV/SAT input. • AUTO Gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected. •OPT Specifies the digital audio signals input to the DIGITAL TV/SAT OPT IN jack. • ANLG Specifies the the analog audio signals input to the TV/SAT AUDIO IN (L/R) jacks. x DUAL XXX (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. • M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. •M (Main) Sound of the main language will be output. • S (Sub) Sound of the sub language will be output. • M+S (Main + Sub) Mixed sound of both the main and sub languages will be output. x DEC. XXXX (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. The initial setting is “DEC. AUTO” for TV/SAT and “DEC. PCM” for DVD. • AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. •PCM PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode DTS-CD when set to “DEC. PCM”. Note When set to “DEC. AUTO” and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to “DEC. PCM”. 28GB Other Operations Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. 1 Press ALT to light up the button. 2 Press SLEEP while the power is on. Each time you press SLEEP, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF The display dims after you have specified the time. Tip To check the remaining time before the receiver turns off, press ALT to light up the button (page 30), then press SLEEP. The remaining time appears in the display. If you press SLEEP again, the sleep timer will be canceled. Other Operations 29GB Operations Using the Remote RM-U700 Operations Using the Remote RM-U700 You can use the remote RM-U700 to operate the components in your system. Before you use your remote Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment. When using the remote, point it at the remote sensor on the receiver. Tip Under normal conditions, the batteries should last for about 6 months. When the remote no long...
Ce manuel est également adapté pour les modèles :Home cinéma - HTR-6600 (1.06 mb)