Évaluations - 1, GPA: 3
(
)
)
|
Photos et spécifications Sony HT-DDWG800 |
Facilité d'utilisation
The warning code will appear on the display cyclically as follows: Warning code —► blank display —► (warning code —t blank display)b) —t PUSH —t blank display — ENTER b)Appears when there are more than one warning code. You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually. To change the settings manually 1 Record down the warning code. 2 Press ©. 3 Press 1/1 to turn off the receiver. 4 Follow the solution provided in the “Warning code and solution” below. 5 Turn on the receiver and perform Auto Calibration again (page 29). Warning code and solution Warning code Explanation and solution WARN. 40 The environment is noisy. Make sure the environment is quiet during Auto Calibration. WARN. 50 The center speaker is not connected. Be sure to connect the center speaker. WARN. 51 The surround speakers are not connected. Be sure to connect the surround speakers. WARN. 60 The front speaker balance is out of range. Reposition your front speakers.c) WARN. 62 The center speaker level is out of range. Reposition your center speaker.d) WARN. 63 The surround left speaker level is out of range. Reposition your surround left speaker.d) WARN. 64 The surround right speaker level is out of range. Reposition your surround right speaker.d) WARN. 70 The front speaker distance is out of range. Reposition your front speakers.c) WARN. 72 The center speaker distance is out of range. Reposition your center speaker.d) WARN. 73 The surround left speaker distance is out of range. Reposition your surround left speaker.d) WARN. 74 The surround right speaker distance is out of range. Reposition your surround right speaker.d) c)For details, (page 44). refer “Front speakers distance” d)For details, refer “Tip” on page 45. 31GB Getting Started 8: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 1 MASTER VOL +/- 1 Press AMP MENU. “1-LEVEL” appears on the display. 2 Press © or b to enter the menu. 3 Press v/v repeatedly to select “T. TONE”. 4 Press © or b to enter the parameter. 5 Press v/v repeatedly to select “T. TONE Y”. The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right —t Surround left —t Sub woofer D.TUNING 'CD'CE'CX) CD D.SKIP >10 MEMORY AMP MENU *(-/--) • (0/10) * CENTER) dg) CLEAR •TOOLS/ •DISPLAY OPTIONS »MUTING •RETURN/EXIT TV CH - TV CH + PRESET - REPLAY ADVANCE PRESET + (Si GO GO <►» 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see “Adjusting the level (LEVEL menu)” (page 40). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value are shown on the display during adjustment. 7 Repeat steps 1 to 5 to select “T. TONE N”. You can also press any input buttons. The test tone turns off. When test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have short-circuit problem. 32GB Playback Selected input Components that can [Display] be played back Selecting a component TV 1/1 AV 1/1 Mirvnl AV I/O ,—^ © OrO © © © © SAT TV SA-CD/CD TUNER © © © © 2CH A.F.D. MOVIE MUSIC CD CD CD CD THEATRE •m*cD*c3:> cd DVD/BD MENU •C^CD'CE) CD AUTO CAL D.TUNING •ce#cd*c2:) a D.SKIP >10 MEMORY AMP MENU •C—• (0/1^ ‘(eNTEr '■!) CLEAR »DISPLAY O, .o o MUTING 3 © »RETURN/EXIT TV CH - TV CH + PRESET - REPLAY ADVANCE PRESET + S (^T) (> Press one of the input buttons to select the component you want. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. DMPORT DIGITAL MEDIA PORT [DMPORT] adapter connected to the DMPORT jack VIDEO1 VCR, DVD recorder etc., [VIDEO 1] connected to the VIDEO 1 jack VIDEO2 Camcorder, video game, [VIDEO 2/ etc., connected to the PORTABLE VIDEO 2 IN/PORTABLE AV]* AV IN jack BD Blu-ray disc player [BD] connected to the BD jack DVD DVD player, etc., [DVD] connected to the DVD jack SAT Satellite tuner, set-top box, [SAT] etc., connected to the SAT jack TV TV, etc., connected to the [TV] TV jack SA-CD/CD Super Audio CD player, [SA-CD/CD/ CD player, etc., connected CD-R]* to the SA-CD/CD/CD-R jack TUNER Built-in radio tuner [FM or AM band] 2 3 * “VIDEO 2/PORTABLE AV” and “SA-CD/ CD/CD-R” scroll across the display, then “VIDEO 2” and “SA-CD/CD” appear respectively. Turn on the component and start playback. Press MASTER VOL +/- to adjust the volume. You can also use MASTER VOLUME on the receiver. TV INPUT 1 1 To activate the muting function Press MUTING. The muting function will be...