Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
• [Progressive] : Enables or disables progressive scan mode. 4 Press OK to con rm your choice. Note • The best setting is automatically selected for the TV. If you need to change the setting, ensure that the TV suppor ts the new setting. • Some video settings depend on the video source, ensure that the disc and the T V suppor t the setting or feature. EN 11 • [Parental] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘ 8’ . • [PBC] : Displays or skips the content menu for VCD and SVCD discs. • [Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘ 0000’ if you do not have a PIN or ifyou have forgotten your PIN. • [ DivX Subtitle] : Selects a character set that suppor ts the DivX subtitle. • [Version Info.] : Displays the software version for the home theater. • [Default] : Resets the home theater to the default settings programmed at the factory. 4 Press OK to con rm your choice. Note • If your preferred disc language is not available, you can select [Other] from the list and enter the 4- digit language code which can be found at the back of this manual. • If you select a language that is not available on a disc, the home theater uses the default language of the disc. • You cannot reset disc lock, password ( PIN code) and parental control settings to their default values. 2 Select [ Preference Setup] > [Version Info.] , then press OK. » The software version is displayed. Update software from a CD-R or USB 1 Check for the latest software version on t. • Search for your model and click on ‘software& drivers’ . 2 Download the software onto a CD- R or USB storage device. 3 Inser t the CD- R or connect the USB storage device to the home theater. 4 Follow the instructions on the TV to con rm the update. » When complete, the home theater automatically switches off and on again. • If not, disconnect the power cord for a few seconds and then reconnect it. Caution • Do not turn off the power or remove the CD- R or USB storage device when the software update is in progress because you might damage the home theater. 12 EN home theater shows which regions it suppor ts Country DVD Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India China Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, CD-R/ CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format • Audio: . mp3, . wma • Video: . divx, . divx ultra, . mpeg, . mpg, . wmv ( simple pro le) • Picture: .jpeg, .jpg Ampli er • Total output power: 300 W RMS ( 30% THD) • Frequency response: 20 Hz- 20 kHz / ±3dB • Signal- to- noise ratio: > 65 dB ( CCIR) / (A-weighted) • Input sensitivity: • AUX: 1000 mV g r g z ( ) • Signal- to- noise ratio: FM 50 dB • Frequency response: FM 180 Hz-10 kHz / ± 6dB USB • Compatibility: USB • Class suppor t: UMS ( USB Mass Storage Class) • File system: FAT16, FAT32 • Maximum memory suppor t: < 160GB Main Unit • Power supply: 110-240V, ~ 50- 60 Hz; • Power consumption: 55 W • Standby power consumption: 0.9 W • Dimensions ( WxHxD): 360 x 58 x 303 (mm) • Weight: 2.3 kg Subwoofer • Impedance: 12 ohm • Speaker drivers: 133 mm ( 5.25” ) woofer • Frequency response: 20 Hz-150 Hz • Dimensions ( WxHxD): 160 x 267.5 x 265 (mm) • Weight: 2.65 kg • Cable length: 2 m Speakers • System: full range satellite • Speaker impedance: 3 ohm • Speaker drivers: 3” full range • Frequency response: 150 Hz-20 kHz • Dimensions ( WxHxD): 100 x 100 x 75 (mm) • Weight: 0.30~ 0.66 kg/each • Cable length: • Center: 1 m • Front: 2 m • Rear: 10 m EN 13 e a problem, register your product and get suppor t at If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this home theater do not work. • Disconnect the home theater from the power outlet for a few minutes, then reconnect. Picture No picture. • Ensure that the T V is switched to the correct source for this home theater. • If this happens when you change the TV system, switch to its default mode: 1) Press . 2) Press . 3) Press SUBTITLE. • If this happens when you switch on the progressive scan mode, switch to its default mode: 1) Press . 2) Press . 3) Press AUDIO. Sound No sound. • Ensure that the audio cables are connected and select the correct input source ( for example, AUDIO SOURCE) for the device you want to play. 14 EN Disc cannot be played. • Clean the disc. • Ensure that the home theater suppor ts the disc ( see ‘ Product speci cations’ on page 13) . • Ensure that the home theater suppor ts the region code of the DVD. • For DVD± RW or DVD± R , ensure that the disc is nalized. DivX video les cannot be played. • Ensure that the DivX le is encoded according...
Ce manuel est également adapté pour les modèles :Home cinéma - HTS2501/12 (293.89 kb)