Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
• “X” is the preset number. • The radio station continues to play but has been deleted from the preset list. • The rest of the preset radio stations remain unchanged. English 41 Sound and Volume Controls English MUTE SURR. SOUND Selecting surround sound • Press SURR. to select : DOLBY+PL II (multi-channel) or STEREO. • The availability of the various surround sound modes depends on the sound available on the disc. • The centre and rear speakers operate only in multi-channel surround mode. • The available output modes for Multichannel include: Dolby Digital, DTS (Digital Theatre Systems) Surround and Dolby Pro Logic II. • Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode. However, mono (single channel sound) sources will not produce any sound from the rear speakers. Helpful Hint: – You are not able to select the surround sound mode if the system setup menu is turned on. Selecting digital sound effects Select a preset digital sound effect that matches your disc’s content or that optimises the sound of the musical style you are playing. • Press SOUND to select the available sound effect. When playing movie discs or in TV mode, you can select : CONCERT, DRAMA, ACTION or SCI-FI. When playing music discs or while in TUNER or AUX/DI mode, you can select : CLASSIC, JAZZ, ROCK or DIGITAL. Helpful Hint: – For flat sound output, select CONCERT or CLASSIC. Volume control • Press VOL +/-on the remote control to increase or decrease the volume level. • “VOL MIN” is the minimum volume level and “VOL MAX” is the maximum volume level. To turn off the volume temporarily • Press MUTE on the remote control. • Playback will continue without sound and “MUTE” appears. • To restore the volume, press MUTE again, or increase the volume level. 42 Other Features Controlling ‘Philips’ TV with the remote control This DVD system’s remote control enables you to control the basic functions of your ‘Philips’ brand TV. A Press SOURCE repeatedly until “TV” appears on the display panel (or press TV on the remote control). B Use ./ > keys or the numeric keypad (0-9) to select the TV’s channel. C Press TV VOL +/-to adjust the TV’s volume level. Software upgrades Periodically Philips will issue software upgrades to enhance your user experience. Before you start ... Check the current software version of this DVD system: 1) Press OPEN CLOSE c to open the disc tray. 2) Press DISPLAY on the remote control. A Visit the Philips website ‘com/support’ to check the availability of the latest software upgrade. Download the software to a CD-R. B Press OPEN CLOSE c to open the disc tray. C Insert the CD-R and press OPEN CLOSE c again. .. The software will start to install on the set automatically. IMPORTANT! Power supply must not be interrupted during upgrade! English 43 Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these instructions, consult your dealer or Philips for help. Problem (General) Solution No power. No picture. Completely distorted picture or black/white picture. No sound or distorted sound. There is no sound from the centre and rear speakers. The remote control does not function properly. – Check if the AC power cord is properly connected. – Press the 2(STANDBY ON) on the front of the DVD system to turn on the power. – Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. – Press the DISC/USB button to select disc mode. – If this happens when you are changing the setting of the ‘TV TYPE’, wait for 15 seconds for the auto recovery. – Check the video connection. – Sometimes a small amount of picture distortion may appear. This is not a malfunction. – Clean the disc. – Adjust the volume. – Check the speaker connections and settings. – Make sure that the audio cables are connected and press the SOURCE button to select the correct input source (for example, TV or AUX/DI) to choose the device that you want to hear through the DVD system. – Make sure that the centre and rear speakers are connected correctly. – Press the SURR. button to select a correct surround sound setting. – Make sure that the source you are playing is recorded or broadcast in surround sound (DTS, Dolby Digital, etc.). – Select the source you want to play (for example, DISC/USB or TUNER) beforepressing the function button (.., ./ >). – Reduce the distance between the remote control and the system. – Replace the batteries with new ones. – Point the remote control directly toward the IR sensor. – Check that the batteries are loaded correctly. 44 Troubleshooting (continued) Problem (Playback) Solution The DVD system does not start playback. The aspect ratio of the...