Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
All referred license terms, warranty disclaimers and copyright notices are available to download with the source code. Appendix 48 6 Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. By pressing You can 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. PR/CH W/S Scan up or down through memorized channels. VOL +/– Adjust the volume of the TV MUTE Turn the TV’s volume on or off Depending on the unit being connected, you may not be able to control your TV using some of the buttons. ,,Note Setting up the remote to control your TV You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer Code Number LG 1(Default), 2 Zenith 1, 3, 4 GoldStar 1, 2 Samsung 6, 7 Sony 8, 9 Hitachi 4 2. Release the 1 (TV POWER) button to complete setting. Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. 49 Appendix 6 Appendix Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1. The update menu will appear on the screen when you turn on the player. 2. Use A/D to select a desired option and then press ENTER (b). [OK] Starts the software update. [Cancel] Exits the update menu and displays it next booting. [Hide] Exits the update menu and it does not appear until next software is uploaded in the update server. Option 2: If the software update is available from the update server, the “Software Update” icon appears at the bottom of the Home menu. Press blue (B) colored button to start the update procedure. Software Update You can update the player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server. yyBefore updating the software in your player, remove any disc and USB Device from the player. yyBefore updating the software in your player, turn the player off and then turn it back on. yyDuring the software update procedure, do not turn off the player or disconnect AC power, or do not press any button. yyIf you cancel the update, turn off the power and turn it on for stable performance. yyThis unit cannot be updated to previous software version. ,,Note 1. Check the network connection and settings (page 20). 2. Select [Software] option in the [Setup] menu then press ENTER (b). 3. Select [Update] option, and press ENTER (b). The player will check for the newest update. yyPressing ENTER (b) while checking for the update will end the process. yyIf there is no update available, the Message, “No update is found.” appears. Press ENTER (b) to return to the [Home Menu]. ,,Note 4. If newer version exists, the message “A new update was found. Do you want to download it?” appears. 5. Select [OK] to download the update. (Selecting [Cancel] will end the update.) 6. The player starts downloading the newest update from the server. (Downloading will takes several minutes depending on your home network condition) 7. When downloading is completed, the message, “Download is complete. Do you want to update?” appears. 8. Select [OK] to start updating. (Selecting [Cancel] will end the update and downloaded file will not be re-usable. To update software the next time, the software update procedure has to be started from the beginning again.) Do not turn off the power during the software update. >>Caution If the software includes the driver update, disc tray may open during the process. ,,Note 9. When update is completed, the power will be turned off automatically in a few seconds. 10. Turn the power back on. The system now operates with the new version. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your player. Refer to “Customer Support” on page 47. ,,Note About Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is a software for sharing video, audio and photo files stored on your computer to this player as a DLNA-compatiable digital media server. yyThe Nero MediaHome 4 Essentials CD- ROM is designed for PCs and should not be inserted in this player or in any product other than a PC. yyThe supplied Nero MediaH...