Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Press INPUT/TUNER until TUNER (FM) appears in the display window. The last received station is tuned in. 2. Press and hold TUNE (-/+) for about two seconds until the frequenc y indication starts to change. Scanning stops when the unit tunes in a station. Or Press TUNE (-/+) repeatedly. 3. Adjust the volume by rotating VOLUME on the front panel or by pressing VOL (+/-) on the remote control. Presetting the Radio Stations You can preset 50 stations for FM. Before tuning, make sure that you have turned Deleting a saved station 1. Press PRESET (W/S) to select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selected preset number. Deleting all the saved stations Press and hold CLEAR for two seconds. “ERASE ALL” will flash up. Press CLEAR again. Then all the saved stations are deleted. Improving poor FM reception Press blue (D) (ST/MONO) coloured button on the remote control. This will change the tuner from stereo to mono and usually improve the reception. See information about a radio down the volume. station 1. Press INPUT/TUNER until the TUNER (FM) The FM tuner is supplied with the RDS (Radio Data appears in the display window. System) facility. This shows information about the 2. Select the desired frequenc y by using TUNE radio station being listened to. Press RDS repeatedly (-/+). to cycle through the various data types: Operating 3. Press ENTER (b) a preset number will flash in the display window. 4. Press PRESET (W/S) to select the preset number you want. 5. Press ENTER (b). The station is stored. 6. Repeat the steps 2 to 5 to store other stations. PS (Programme Service Name) The name of the channel will appear in the display PTY (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display. RT (Radio Text) A text message contains special information from the broadcast station. This text may scroll across the display. CT (Time controlled by the channel) This shows the time and date as broadcast by the station. 52 Operating Using the Online You can use various content services via Internet with the Online feature. 1. Check the network connection and settings (pages 27-29). 2. Press HOME MENU (n). 3. Select the [Online] using A/D, and press ENTER (b). 4. Select an Online service using A/D, and press ENTER (b). Operating 4 yDetailed information of each service, contact to the content provider or visit support link of the service. yThe content of Online services and service related information, including user interface, is subject to changes. Please refer to the web site of each service for most up-to-date information. yPlease note that the related privacy policy will be applied to your privacy and legal rights of you when you provide the online services with user names, passwords, or other login information or personal information and when Pioneer stores them. Please refer to Pioneer Privacy Policy on the WEB site. ,,Note Troubleshooting 53 Troubleshooting General Symptom Cause & Solution The Power does not turned on. • Plug the power cord into the wall outlet securely. The unit does not start playback. • Inser t a playable disc. (Check the disc type, colour system, and regional code.) • Place the disc with the playback side down. • Place the disc on the disc tray correctly inside the guide. • Clean the disc. • Cancel the Rating function or change the rating level. The angle cannot be changed. • Multi-angles are not recorded on the DVD Video being played. Cannot play movie, photo or music files. • The files are not recorded in a format that the unit can play. • The unit does not suppor t the codec of the movie file. The remote control does not work properly. • The remote control is not pointed at the remote sensor of the unit. • The remote control is too far from the unit. • There is an obstacle in the path of the remote control and the unit. • The batteries in the remote control are exhausted. The unit is plugged in, but the power will not turn on or off. You can reset the unit as follows. 1. Press and hold the STANDBY/ON button for at least five seconds. This will force the unit to power off then turn the unit back on. 2. Unplug the power cord, wait at least five seconds, and then plug it in again. The unit is not operating normally. Troubleshooting 54 Troubleshooting Network Symptom Cause & Solution BD-LIVE feature does not work. • The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. • Ensure that the unit is correctly connected to the local area network and can access the internet (see page 27-29). • Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. • The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted]. Streaming video services (such as YouTube™, etc.) are often s...
Ce manuel est également adapté pour les modèles :Home cinéma - BCS-414 (7.54 mb)