Évaluations - 3, GPA: 4.3
(
)
)
|
Photos et spécifications Sony BDV-E970W |
Facilité d'utilisation
In this case, the volume level that appears on the TV screen and the unit's front panel display may differ. Setting the Maximum Volume Level of the System (Volume Limit) When the System Audio Control function is activated, loud sound may be output depending on the volume level of the system. You can prevent this by limiting the maximum level of the volume. For details, see [Volume Limit] (page 59). 49GB Other Operations Receiving the digital audio signal of the TV (Audio Return Channel) The system can receive the digital audio signal of the TV via an HDMI cable when your TV is compatible with the Audio Return Channel function. You can enjoy TV sound via the system by using just one HDMI cable. For details, see [Audio Return Channel] (page 59). Operating the system via the TV remote (Remote Easy Control) You can control the basic functions of the system via the TV remote when the system’s video output is displayed on the TV screen. For details, refer to the operating instructions of the TV. Changing the language for the on-screen display of the TV (Language Follow) When you change the language for the on-screen display of the TV, the system’s on-screen display language is also changed after turning the system off and on. Calibrating the Appropriate Settings Automatically [Auto Calibration] D. C. A. C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically. Note • The system outputs a loud test sound when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors. 1 Press HOME. The home menu appears on the TV screen. 2 Press C/C to select ^ [Setup]. 3 Press X/X to select [Audio Settings], then press ©. 4 Press X/X to select [Auto Calibration], then press ©. The confirmation display for [Auto Calibration] appears. 5 Connect the calibration mic to the A.CAL MIC jack on the rear panel. Set up the calibration mic at ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. To cancel, select [Cancel]. 7 Press ©. [Auto Calibration] starts. The system adjusts the speaker settings automatically. 50fis Be quiet during the measurement. Note • Before [Auto Calibration], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained. • When you use the Wireless Surround Speaker Kit (WAHT-SBP2, optional) for the surround back speakers (page 15), install the speakers in appropriate location and turn the surround amplifier on. To use the surround back speakers, set [Surround Back] in [Speaker Settings] to [Yes] (page 51) 8 Confirm the conclusions of [Auto Calibration]. The speakers connected to the unit are listed as [Yes] on the TV screen. Note • If measurement fails, follow the message then retry [Auto Calibration]. • The measurement for [Subwoofer] is always [Yes] and [Speaker Settings] returns to the default setting when you perform [Auto Calibration]. 9 Press X/X to select [OK] or [Cancel], then press ©. ■ The measurement is OK. Disconnect the calibration mic, then select [OK]. The result is implemented. ■ The measurement is not OK. Follow the message, then select [OK] to retry. Note • While the Auto Calibration function works: - do not turn off the power. - do not press any button. - do not change the volume. - do not change the function. - do not change the disc. - do not insert a disc. - do not disconnect the calibration mic. Setting the Speakers [Speaker Settings] To obtain the best possible surround sound, set connection of the speakers and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level. 1 Press HOME. The home menu appears on the TV screen. 2 Press C/C to select £ [Setup]. 3 Press X/X to select [Audio Settings], then press ©. 4 Press X/X to select [Speaker Settings], then press ©. The [Speaker Settings] display appears. 5 Press X/X to select the item, then press ©. Check the following settings. ■ [Connection] If you do not connect center or surround speakers, set the parameters for [Center] and [Surround]. Since the front speaker and subwoofer settings are fixed, you cannot change them. When you use the Wireless Surround Speaker Kit (WAHT-SBP2, optional) for the surround back speakers (page 15), set [Surround Back] also. [Front] [Yes] [Center] [Yes]: Normally select this. [None]: Select this if no center speaker is used. [Surround] [Yes]: Normally select this. [None]: Select this if no surround speaker is used. [Surround Back] [Yes]: Select this if surround back speakers are used. [None]: Select this if no surround back speakers is used. 51GB Other Operations [Subwoo...
Ce manuel est également adapté pour les modèles :Home cinéma - BDV-E670W (2.24 mb)