Évaluations - 4, GPA: 3.5 ( )

Fabricant : Sony Taille : 1.11 mb Nom Fichier : Langue d'enseignement:

Tip The tuning scale differs depending on the area code as shown in the following table. For details on area codes, see page 3. Area code FM AM CEL, CEK, AU, CN 50 kHz 9 kHz Automatic tuning If you do not know the frequency of the station you want, you can let the receiver scan all available stations in your area. 1 Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. Tip You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING –. Press TUNING + to scan from low to high; press TUNING – to scan from high to low. The receiver stops scanning whenever a station is received. Tip If “STEREO” flashes in the display and the FM stereo reception is poor, press FM MODE to change to monaural (MONO). You will not be able to enjoy the stereo effect, but the sound will be less distorted. To return to stereo mode, press FM MODE again. 18GB Direct tuning You can enter the frequency of the station you want directly. 1 Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. 2 Press D.TUNING. 3 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz Press 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Press 1 b 3 b 5 b 0 If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. If you cannot tune in a station and the entered numbers flash Make sure you have entered the right frequency. If not, repeat steps 2 and 3. If the entered numbers still flash, the frequency is not used in your area. Storing FM stations automatically — AUTOBETICAL (Models of area code CEL, CEK only) This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals. If you want to store FM or AM stations one by one, see “Presetting radio stations”. Use the buttons on the receiver for the operation. 1 Press ?/1 to turn off the receiver. 2 Hold down INPUT SELECTOR and press ?/1 to turn the receiver back on. “AUTO-BETICAL SELECT” appears in the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. For more details on RDS, see page 21. Regular FM stations are assigned 2character preset codes and stored after the RDS station. When done, “FINISH” appears in the display momentarily and the receiver returns to the normal operation. Notes • Do not press any button on the receiver or supplied remote during autobetical operation, except ?/1. • If you move to another area, repeat this procedure to store stations in your new area. • For details on tuning the stored stations, see “Tuning to preset stations”. • If you move the antenna after ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :