Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Home cinéma - BP420K (3.23 mb)
Home cinéma - BP420K (3.35 mb)
Facilité d'utilisation
* If you do not use karaoke mode, please unplug the microphone. c (-VOL.+) MIC Volume control Rear panel d Display Window e Remote Sensor f B (OPEN/CLOSE) g N (PLAY / PAUSE) h Z (STOP) i USB Port j 1 (POWER) a AC power cord d HDMI OUT b LAN port e VIDEO OUT c DIGITAL AUDIO OUT (OPTICAL) f 2CH AUDIO OUT (Left/Right) Connecting 15 Connecting to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. • HDMI connection (page 15) • Video connection (page 16) HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable ( Type A, High Speed HDMI™ Cable). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor. yDepending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual. yPlease refer to the manuals of your T V, Stereo System or other devices as necessary to make the best connections. yDo not connect the player’s AUDIO OUT jack to the phono in jack (record player) of your audio system. yDo not connect your player via your VCR. The image could be distorted by the copy protection system. , Note Rear of the unit TV HDMI cable 2 Connecting Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Additional Information for HDMI • When you connect a HDMI or DVI compatible device make sure of the following: -Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. -The connected device’s video input is set correctly for this unit. - The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input. • Not all HDCP-compatible HDMI or DVI devices will work with this player. - The picture will not be displayed properly with non-HDCP device. 16 Connecting 2 Connecting yIf a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. yWhen you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17) ySelect the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 26). yChanging the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. yWhen the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable. yIf there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m). , Note Video/Audio (Left/Right) Connection Connect the VIDEO OUT ...