Évaluations - 2, GPA: 4 ( )

Fabricant : Bosch Taille : 294.71 kb Nom Fichier : 7c3e8b8b-651a-a7b4-fda9-0f9817b088b0.pdf Langue d'enseignement:

SAVE THESE INSTRUCTIONS Work Area cord to carry the tools or pull the plug Keep your work area clean and well lit. from an outlet. Keep cord away from Cluttered benches and dark areas invite heat, oil, sharp edges or moving parts. accidents. Replace damaged cords immediately. Damaged cords increase the risk of electric Do not operate power tools in explosive shock. atmospheres, such as in the presence of flammable liquids, gases, or dust. Power When operating a power tool outside, use tools create sparks which may ignite the an outdoor extension cord marked "W-A" dust or fumes. or "W." These cords are rated for outdoor use and reduce the risk of electric shock. Keep by-standers, children, and visitors Refer to “Recommended sizes of Extension away while operating a power tool. Cords” in the Accessory section of this Distractions can cause you to lose control. manual. Electrical Safety Personal Safety Grounded tools must be plugged into an Stay alert, watch what you are doing and outlet properly installed and grounded in use common sense when operating a accordance with all codes and power tool. Do not use tool while tired or ordinances. Never remove the grounding under the influence of drugs, alcohol, or prong or modify the plug in any way. Do medication. A moment of inattention while not use any adaptor plugs. Check with a operating power tools may result in serious qualified electrician if you are in doubt as personal injury. to whether the outlet is properl} grounded. If the tools should electrically Dress properly. Do not wear loosi malfunction or break down, grounding clothing or jewelry. Contain long hair2 provides a low resistance path to carry Keep your hair, clothing, and gloves awa} electricity away from the user. Improper from moving parts. Loose clothes, jewelry, grounding can shock, burn or electrocute. or long hair can be caught in moving parts. Grounded tools are equipped with three Keep handles dry, clean and free from oil conductor cord and three prong type plugs. and grease. Before plugging in the tool be certain the Avoid accidental starting. Be sure switch outlet voltage supplied is within the voltage is .OFF. before plugging in. Carrying tools marked on the nameplate. Do not use .AC with your finger on the switch or plugging in only. rated tools with a DC power supply. tools that have the switch “ON” invites Avoid body contact with grounded accidents. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased Remove adjusting keys or wrenches risk of electric shock if your body is before turning the tool .ON.. A wrench or grounded. If operating the power tool in a key that is left attached to a rotating part of damp locations is unavoidable, a Ground the tool may result in personal injury. Fault Circuit Interrupter must be used to Do not overreach. Keep proper footing supply the power to your tool. Electrician’s and balance at all times. Proper footing rubber gloves and footwear will further and balance...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :