Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Black & Decker, Modèle Scrugun 2032-10

Fabricant : Black & Decker
Taille : 3.45 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


5) 1. Turn locator until end of bit extends 3/16" beyond end of locator. 2. Test drive a fastener In scrap material to determine if fastener is correctly seating. 3. Further adjustment may be necessary to increase or decrease the fastener depth. TO INCREASE, turn the locator so that end of bit extends further from end of locator. TO DECREASE, turn the locator so that end of bit is closer to end of locator. Black & Decker Drywali Units have very fine depth settings, each “detent” is .0052* or one revolution of the locator equals .083* change In depth setting. SCREWDRIVER ACCESSORIES continued Hex Drive Shank Extensions ”=F!fri SHANK SIZE SQ. DR. LENGTH 1/4** 1/4* 2* sckets—1/4* hex. 1/4** 1/4* 6* TYPE SOCKET SIZE DIAM. LENGTH 1/4* 1/2* 7/8* Non- 5/16* 1/2* 7/8* Magnetic 3/8* 9/16* ■ 15/16* 1/4* 7/16* 7/8* Magnetic 5/16* 1/2* 7/8* 3/8* 9/16“ 7/8* Sockets for the above : FOR DRIVING HEX NUTS AND SHEET METAL SCREWS 1/4* Sq. Drive SCREW TYPE AND NUMBER SIZE FLAT OR - OVAL . ROUND u FILLISTER u BINDING TT PAN U TRUSS 1/4" Hex Bits For Slotted Head Screws 3,4 3,4 4,5 3 4 2 5 5 6 4 5 3,4 6 6 8 5 6 — 8 8 10 6,8 8 5,6 10 10,12 " 12 10 10 8 12,14,1/4 14,16,1/4 1/4 12,1/4 12,1/4 10 12 14,1/4 1/4 12 12 10 1/4" Hex Bits With Rotating Finder For Use With Any 1/4" Hex Drive Power Tool .............................................I BIT LENGTH 4,5 4,5 4,5,6 4,5 4,5 — 3-1/2* 8 8 8,10 6 8 5,6 3-1/2" 8 8 8,10 6 8 5,6 6* 10 10 12 8,10 10 8,10 3-1/2* 12 12 1/4 — 12 — 3-1/2* MISC. SCREWDRIVER ACCESSORIES 6* Hex Bit Extension For use with 1/4" Hex Shanks and/or other extensions. 1/4* oit ««re Drive Magnetic Socket For driving 8 Pointed Nylon and Steel Headed Screws. Heavy-Duty Tool Box Cat. No. 50078 I Scrugun® Holster Cat. No. 69590 attaches tobelts up to 2-3/4" wide. Magnetic Bit Tip Holders for Dry wall Scruguns 1/4" Hex Shank for 1/4" Hex Tip (3-3/32 long) for use with all Drywall SCRUGUNS® EXTRA LENGTH BIT TIP DRIVE BODY. 1/4* Hex Shank for 1/4" Hex Tip (2-31/32 long) for use with all Drywall SCRUGUNS® STANDARD LENGTH STAINLESS STEEL BODY. (Standard equipment on H.D. drywall SCRUGUNS®) BELT CLIP Cat. No. 69600 For all H.D. SCRUGUN Screwdrivers. (Standard equipment on H.D. drywall SCRUGUNS*) 7 VERSA-CLUTCH FOR DRIVING A WIDE RANGE OF FASTENERS RPM NOMINAL CAPACITY SELF THREAD SHEET WOOD LAG DRILL CUTTING METAL MACHINE SCREWS SCREWS SCREWS SCREWS SCREWS SCREWS 0-1200 #12 1/4" w/pilot hole 1/4" 1/4" 1/4* 1 4' 3/16" CRS 1. Install proper fastener driving accessory and set screwdriver for ■ correct rotation, 2. Adjust clutch setting. See Fig. 4. 3. Place fastener in accessory, contact workpiece and apply pressure to seat fastener keeping clutches engaged. 4. Upon fastener seating the clutches will ratchet. Disengage screwdriver from fastener. NOTE: With Versa-Clutch the operator has the ability to “override” clutch ratchet if a fastener hits a wood knot, variable hardness in steel workpieces or...

Ce manuel est également adapté pour les modèles :
Perceuses et shuropopverty - Scrugun 2020-10 (3.45 mb)
Perceuses et shuropopverty - Scrugun 2033-10 (3.45 mb)
Perceuses et shuropopverty - Scrugun 2034-10 (3.45 mb)
Perceuses et shuropopverty - Scrugun 2034-15 (3.45 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories