Évaluations - 1, GPA: 5 ( )

Fabricant : Global Machinery Company Taille : 532.53 kb Nom Fichier : Langue d'enseignement:

For shower, you need to quit Medium Warm mode, and press Mode button to enter Real-time Heating / Keeping mode.Then the water can be heated to the setting temperature in a short time.). When water temperature decreases to 34 , machine automatically restarts heating. Heating power level can be manually set with Power button. Example: Fig. 10 shows Medium Warm mode. Press Power button to set power level 2150 W with corresponding indication lighted. The actual temperature then is 52 . When it decreases to 34 , machine will automatically re-heats to 40 and keeps warm. It cycles in this way. In this mode, the machine defaulted highest heating temperature 40 can't be adjusted. (Fig.10) (Fig.11) 7. Night Power Setting With machine powered on, as described in Item 10, consecutively press Mode button until it enters Night Power operation mode (with Night Power indication on the display). If you would use hot water in early morning, you may adjust operation mode to Night Power mode. Machine will heat / warm in default period (0:00 on and 6:00 off). Heating power level and highest temperature can be manually set. In this mode, you can press Set button to calibrate clock time. In addition, in regional power consumption regulations, night power price rate is lower than in day, so Night Power mode will be easier and more economic. Note: In selecting Night Power function, water heater clock shall be adjusted to local time. Inaccurate clock will cause night period partly charged as day use. (Only for regions with Peak and Valley Electricity Rates) Example: With machine powered on, press Mode button to select Night Power mode. When PC clock displays 00:00, machine automatically starts heating. It enters warm status after reaching setting value and has thermostat control during 0:00 6:00. (see Fig.11) 8. Intelligent Heating Function Intelligent heating function means that the system can analyze, process and memorize user's water use habits in one week, and accordingly heat water in advance automatically. With machine powered on, consecutively press Mode button until it enters Intelligent operation mode with intelligent indication lighted on. System automatically starts heating in the first memorized heating time since then. Heating power and highest temperature can be manually set. In non-heating period, system remains standby with clock and intelligent indications lighted on. After it reaches the heating temperature, the machine will start to heat aotomatically. If you'd like to quit Intelligent Heating mode and enter another mode, you can press any button on control panel to activate the interface (buttons on remote controller inactive), and then press Mode button to shift modes. Notes: 1. In any mode after powering on, Intelligent Heating function can memorize your water use habits. If you bathe in a fixed period everyday several times a week (4 times or more than 4 times), system will analyze and memorize your this habit and automatically start heating in advance. 2. Only in Intelligent mode can Intelligent function be executed. (Fig.12) (Fig.13) Never do that Be sure to act as per instructions Description of the Symbols Operation Instructions 2. Temperature Setting 3. Clock Calibration With the machine powered on (with no any digits flashing on the display), press or button to enter temperature setting status with the temperature digits rapidly flashing. Temperature can be changed between 35 - 75 with an increment 1 . In real-time heating mode, you can directly press or button to adjust temperature setting value. In medium warm status, machine defaulted highest temperature is 40 and can't be adjusted. If actual water temperature is lower than setting value and the machine is in medium warm mode, you need to change operation mode to real-time heating mode, and then the machine can heat water to the set temperature. Clock goes in 24-hour and 60-min system in a second flashing way. Example: calibrate the clock to 11:29 After powering on, in real-time heating and night power modes, you can press Set button to enter clock calibration status with hour digits flashing. Press or button to set 11. Press Set button again and minute digits flash. Press or button to set 29. You can press Set button to confirm current setting, or wait 6 s after which the system will automatically confirms and quits sett...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :