Évaluations - , GPA: ( )

Instructions Bosch, Modèle 23609

Fabricant : Bosch
Taille : 2.4 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Such preventive safety measures reduce the risk of starting the tool accidentally. Cordless Impact Drivers and Impact Wrenches FIG. 1 VARIABLE SPEED TRIGGER SWITCH FORWARD/REVERSING LEVER & TRIGGER LOCK RUBBERIZED GRIP BATTERY RELEASE TABSBATTERY PACK VENTILATION OPENINGS BRUSH COVER LOCKING SLEEVE BELT CLIP (Optional Accessory) SWIVEL LIGHTING SYSTEM BIT AND BIT STORAGE 1/2" SQUARE DRIVE (Models 22612, 22614 & 22618 only) Model number 22612 22614 22618 Voltage rating 12 V 14.4 V 18 V No load speed n0 0-2,800/min n0 0-2,800/min n0 0-2,800/min Impact rate 0-3,200 0-3,200 0-3,200 Maximum torque 1,550 in-lbs 1,770 in-lbs 1,950 in-lbs Maximum Capacities Output drive 1/2" Square drive 1/2" Square drive 1/2" Square drive Battery pack BAT043-BAT046 BAT038-BAT041 BAT025, BAT026, & BAT120 & BAT140 BAT180 & BAT181 Charger BC001-6 & BC016 BC001-6 & BC016 BC003, 4, 6 & BC016 BC130 & BC230 BC130 & BC230 BC130 & BC230 Voltage rating 120 V 60 Hz 120 V 60 Hz 120 V 60 Hz BC006 charger requires 12 V DC input NOTE: ONLY USE CHARGERS LISTED ABOVE -8 BM 2609140358 12-05 12/6/05 3:28 PM Page 9 Model number 23609 23612 23614 23618 Voltage rating 9.6 V 12 V 14.4 V 18 V No load speed n0 0-2,800/min n0 0-2,800/min n0 0-2,800/min n0 0-2,800/min Impact rate 0-3,200 0-3,200 0-3,200 0-3,200 Maximum torque 950 in-lbs 1,050 in-lbs 1,150 in-lbs 1,350 in-lbs Maximum Capacities Chuck size 1/4" Hex-shank 1/4" Hex-shank 1/4" Hex-shank 1/4" Hex-shank with power groove with power groove with power groove with power groove Screw sizes #12 x 3" #14 x 3" #16 x 3" #16 x 3" Mild metal 1/4" 3/8" 1/2" 3/4" Hard wood 3/4" 1-1/4" 1-1/2" 2" Soft wood 1-1/4" 1-1/2" 2" 3" Battery pack BAT048 & BAT100 BAT043-BAT046 BAT038-BAT041 BAT025, BAT026, & BAT120 & BAT140 BAT180 & BAT181 Charger BC001-6 & BC016 BC001-6 & BC016 BC001-6 & BC016 BC003, 4, 6 & BC016 BC130 & BC230 BC130 & BC230 BC130 & BC230 BC130 & BC230 Voltage rating 120 V 60 Hz 120 V 60 Hz 120 V 60 Hz 120 V 60 Hz BC006 charger requires 12 V DC input NOTE: ONLY USE CHARGERS LISTED ABOVE -9 BM 2609140358 12-05 12/6/05 3:28 PM Page 10 Operating Instructions INTENDED USE This tool is intended for the fastening and loosening of bolts, nuts and various threaded Your tool is equipped with a quick release chuck. To insert an accessory, simply pull locking sleeve forward, insert desired accessory into chuck and release locking sleeve (Fig. 2). To remove an accessory, pull locking sleeve forward and simply remove it from the chuck. LOCKING SLEEVE CHUCK FIG. 2 SCREWDRIVER BIT BIT HOLDER SCREWDRIVER BIT Do not use this tool as a drill. Tools equipped with shut-off clutches are not designed for drilling applications. The clutch can shut off automatically and without warning. Attempting to restart drilling after shut-off has been reached can cause the tool to twist out of your hand until the clutch again reaches shut-off. Do not attempt to insert quick-change type drill bits into this chuck. INSERTING AND REMOVING ACCESSORIES (Models 22612, 22614 & 22618 only) Attach only high quality accessories with the proper size square drive designed for use with impact wrenches. Your impact wrench is equipped with a 1/2" square drive. To install a socket, simply push completely onto output drive. To remove, pull off output drive (Fig. 3). fasteners. This tool is not intended for use as a drill. INSERTING AND REMOVING ACCESSORIES (Models 23609, 23612, 23614 & 23618 only) To avoid loss of control, ensure bit is locked in chuck by pulling on bit after it has been inserted. The chuck accepts only standard 1/4" hexagonal shank accessories with power groove. OUTPUT DRIVE SOCKET FIG. 3 !WARNING VARIABLE SPEED CONTROLLED TRIGGER SWITCH Your tool is equipped with a variable speed trigger switch. The tool speed can be controlled from the minimum to the maximum nameplate RPM by the pressure you apply to the trigger. Apply more pressure to increase the speed and release pressure to decrease speed (Fig. 1). FORWARD/REVERSING LEVER & TRIGGER LOCK Your tool is equipped with a forward/ reversing lever and trigger lock located above the trigger (Fig. 1). This lever was designed for changing rotation of the chuck, and for locking the trigger in an “OFF” position to help prevent accidental starts and accidental battery discharge. For forward rotation, (with chuck pointed away from you) move the lever to the far left. For reverse rotation move the lever to the far right. To activate trigger lock move lever to the center off position. !CAUTION Do not change direction of rotation until the tool comes to a complete stop. Shifting during rotation of the chuck can cause damage to the tool. BELT CLIP (Optional Accessory) !WARNING When the tool is attached to the belt, position yourself to avoid entanglement with surrounding objects. Unexpected entanglement could cause the tool to fall resulting in injury to the operator or bystanders. -10 BM 2609140358 12-05 12/6/05 3:28 PM Page 11 The optional belt clip accessory will allow you to conveniently attach ...