Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
The distance between position 1 and 2, 2 and 4 and so on should be less than the width of the mortising chisel. Sharpening The mortising bit and chisel must be periodically re-sharpened. Sharpen mortising chisels with a round slipstone, working from the inside of the chisel to the edge. Do not sharpen the outside edge. Any burr on the outside edge of the chisel caused by sharpening the inside must be removed with a flat stone. Sharpen the mortising bit with a flat stone or triangular file. COPYRIGHT © 1999 BY GRIZZLY INDUSTRIAL, INC. REVISED OCTOBER, 2007 (TR) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BA0520 PRINTED IN TAIWAN W1 Wi 13-1 13-2 13-3 13-4 13-5 MORTISING ATTACHMENTS NOT SUPPLIED WITH CHISELS. REF PART # 13 DESCRIPTION 1 P1083001 CONE 2-19/32 - 66MM 1 P1370001 CONE 2-3/8'' 1 P1514001 CONE 1-5/8'' 1 P1515001 CONE 1-7/8'' 2 PB23 HEX BOLT 5/16-18 X 2-1/2 3 PN02 HEX NUT 5/16-18 4 P1083004 KNOB 5 P1083005 HOLD DOWN CASTING 6 PB30 HEX BOLT 5/16-18 X 4-1/2 7 PW07 FLAT WASHER 5/16 8 P1083008 ROD 9 P1083009 BRACKET 10 P1083010 HOLD DOWN ROD 11 P1083011 FENCE 12 PWN03 WING NUT 5/16-18 13 P1083013 SET OF 5 CHISELS 13-1 P1083013-1 MORTISING CHISEL - 1/4" 13-2 P1083013-2 MORTISING CHISEL - 5/16" 13-3 P1083013-3 MORTISING CHISEL - 3/8" 13-4 P1083013-4 MORTISING CHISEL - 1/2" 13-5 P1083013-5 MORTISING CHISEL - 5/8" 10...
Ce manuel est également adapté pour les modèles :Perceuses et shuropopverty - G1083 (197.18 kb)
Perceuses et shuropopverty - G1370 (197.18 kb)
Perceuses et shuropopverty - G1515 (197.18 kb)