Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
18. Do notuse for any purpose other than described in this user’s guide. 19. Do notattempt to use the charger with any other product or attempt to charge this product with another charger. Use only charger model MCDC080020UA2 supplied with this appliance. 20. This appliance is not submersible. Do Notimmerse in water or any other liquids. OPERATING INSTRUCTIONSFig. 6Fig. 7Fig. 8Fig. 94. Select an appropriate drill type for the material to be drilled. 5. Carefully measure and mark the location of all bracket holes and then drill holes and screw the wall mounting bracket onto the wall. (Fig. 6) 6. Insert the hanging hook into the wall mounting bracket. (Fig. 7) 7. Insert the cordless scrubber into the hanging hook for charging. (Fig. 8) Do not leave the cordless scrubber for more than 24 hours when it is charging. 8. You can hang the cordless scrubber from any rod to store as long as it will not be immersed in water or any other liquid. (Fig. 9) 5. Attach the desired brush (large or narrow brush) to the end of the power head by pushing it on. 6. To remove the accessories, turn the unit off and then pull them off the power head. 7. To remove the power head from the power wand, press the release button and pull apart. Note: Always let the scrubber and brushes dry completely before storing in a confined area.Wall Mounting Bracket1. Make sure that the intended wall area for the wall mounting bracket to be drilled is free from any hidden electrical wires, water pipes and gas lines. 2. Select an appropriate place close to a wall power outlet (120V., 60 Hz). 3. Do notmount near direct sunlight, near a heat source or outdoors. To Order Replacement AccessoriesPlease contact customer service at 1 (800) 798-7398 for replacement or additional brushes or for a new power wand. To Extend Your Battery Life• Only recharge when the battery is almost fully discharged. • Completely discharge and recharge the battery at least once a month. • Do not store the cordless scrubber with the charging adaptor attached and plugged in. • We do not recommend that the appliance be left plugged into the charging adaptor for more that 24 hours. Battery DisposalThe Ni-Cdbatteries in your cordless scrubber are not replaceable. When the Ni-Cdbatteries are no longer recharging, the power wand must be disposed of properly. Call your nearest recycling center for information on the recycling and disposal of Ni-Cdbatteries. Please consult your Yellow Pages or local recycling center for more information. Never attempt to throw the unit into a fire or incinerate it. To ChargeTo Store 2 GETTING TO KNOW YOUR CORDLESS HOUSEHOLD SCRUBBER Technical Specifications Voltage: 3.6 V DC Power: 20 Watts Illustrations may differ from actual product. NOTE: The Cordles Household Scrubber is shipped with the battery uncharged. Charging of the unit for 20 hours prior to first use is required. 3 OPERATING INSTRUCTIONS Fig. 1Using Your Cordless Household ScrubberYour cordless scrubber has not yet been charged. Before first use, the power wand must be charged for a period of 20 hours.Warning: This appliance is not submersible. Do notimmerse in water or any other liquids. 1. Make sure that the “On/Off” button on the power wand is in the “Off” position. 2. Insert the charging jack into the charging port. (Fig. 1) 3. The red charging light will light up while the unit is charging. 4. Let the power wand charge for 20 hours. Note: Your scrubber will work approximately up to one (1) hour on a single chargeFig. 3Attaching the Accessories to the Power HeadYour cordless scrubber comes with a large brush, a narrow brush and two extension wands. Large BrushCan be used to clean: Household: tiles, tubs, shower doors, walls, fiberglass, hard plastic surfaces, countertops, backsplashes, patio furniture, walls and windows. Automotive: tires, hubcaps, lined truck beds, vinyl doors. Narrow BrushCan be used to clean: Household: bathroom fixtures, drains, narrow spaces such as between appliances or hard to reach corners.Extension WandUse one or both of the extension wands to reach high places. 4. To remove the accessories, turn the unit off and then pull them off the power head. 5. To remove the power head from the power wand, press the release button and pull apart. (Fig. 4) Fig. 53. If you want to add the other extension wand, just attach it to the end of the first one. Again make sure that the two extension wands are locked together. 4. Insert the power head onto the extension wand making sure that it locks in place. Assembling Your Cordless Household ScrubberYour cordless scrubber can be used with or without the extension wands. To use without the extension wand: 1. Make sure that the On/Off button is in the “Off” position. 2. Insert the power head onto the power wand making sure that it locks in place. (Fig. 2)Fig. 2To use the accessories with one or both extension wands: 1. Make sure that the On/Off button is in the “Off” position. 2. Insert one of the extension wands onto the power wand...