on..................................................................................................................................3 Ant enn a con nec tio n..............................................................................................................3 Preparation for the remote control .....................................................................................3 Position of keys and plug-ins ............................................................................

Press MENU button continuously, until select TUNING menu. TUNING POS EDIT ■* POS EX. ■* SEARCH UP AUTO MEMORY -► SELECT t * ADJUST *4 3. Press CH+/- button and move the indicator to SEARCH. □ <1. TUNING POS EDIT ■+ POS EX. ■+ SEARCH UP AUTO MEMORY -► SELECT t * ADJUST *4 4. Press VOL+/- button to start searching. VOL- button is used to search the lower frquency channel. VOL+ button is used to search the higher frequency channel. Repeat the steps until you find the channel you ne

All foods must be in packages, which do not allow the flow of air or moisture in, or out. Improper storage will result in odor and taste transfer and will result in the drying out of the improperly packaged food. • Follow package or container instructions for proper storage. • Packaging Recommendations: Plastic containers with air tight lids Heavy duty aluminum foil Plastic wrap made from saran film Self-sealing plastic bags • Do not refreeze defrosted/thawed foods. • It is recommended that

However, you can also use the Direct-digit Choosing button on the remote control to select this channel directly. If you want to recover the skipped channel 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. 2. Do the above steps again. 3. Press VOL+/- button to set SKIP OFF.

(Please also screw the shower and tube out of the mixing valve and take note not let the hot water scald yourself. ) And then, drain the water in the tank out. Before the next usage, in order to avoid accidents, it is advised open the hot water valve first before turn on the power supply to let the gas out of the tube. It is not allowed smoking or fire near the open valve. Meanwhile, please make sure that all parts of the water heater are in good condition. 1. 2. 3. Operation Diagram 4. 5.Provid

Gaskets must be kept clean and pliable to assure a proper seal. • Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and assure a good seal. 10 Lock and Key • Your freezer has a lock and key feature to secure the freezer. Close the lid and turn key to lock.Turn key in direction to unlock. Food Storage Information Frozen Food: • Wipe containers before storing to avoid needless spills. • Hot food should be allowed to cool before storing in the freeze

They are on a label in back of the freezer. Model number Serial number Date of purchase 2 Table Of Contents PAGE Safety Precautions ..........................................................................1 Parts And Features .........................................................................4 Installing Your Freezer....................................................................5 Unpacking Your Freezer..........................................................................5

Compressor cycle must be complete to operate. Food temperature appears too warm: • Frequent door openings. • Allow time for recently added warm food to reach freezer temperature. • Check gaskets for proper seal. • Adjust temperature control to colder setting. Food temperature is too cold: • If temperature control setting is too cold, adjust to a warmer setting and allow several hours for temperature to adjust. Freezer runs too frequently: • This may be normal to maintain constant temper

garage etc. Your freezer was not designed to operate in temperature settings below 32* Fahrenheit. • Select a suitable location for the freezer on a hard even surface away from direct sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected. 6 Freezer Features And Use Operating Your Freezer • Once the freezer is in its proper place, plug it in an electrical outlet having 220 volts and 15 amps. • Set the temperature, on the

At the end of the wash cycle Six beeps will indicate that the wash cycle has finished and the cycle indicator light (J) for the cycle will begin to die out. Turn off the appliance using the ON-OFF button. Turn off the water supply to the appliance and open the door. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better. Setting the Wash Cycle with a Delayed Setting the Wash