Log:
Évaluations - 0, GPA: 0 ( )

Instructions Bosch, Modèle HBA23B160R/07

Fabricant : Bosch
Taille : 2.36 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


Remove flecks of limescale, grease, starch and albumin (e. g. egg white) immediately. Corrosion can form under such residues. Special stainless steel cleaning products suitable for warm surfaces are available from our after-sales service or from specialist retailers. Apply a thin layer of the cleaning product with a soft cloth. Door panels Glass cleaner: Clean with a soft cloth. Do not use a glass scraper. Cooking compartment Hot soapy water or a vinegar solution: Clean with a dish cloth. If there are heavy deposits of dirt, use a stainless steel scouring pad or oven cleaner. Only use when the cooking compartment is cold. Glass cover for the oven light Hot soapy water: Clean with a dish cloth. Seal Do not remove. Hot soapy water: Clean with a dish cloth. Do not scour. Shelves Hot soapy water: Soak and clean with a dish cloth or brush. Telescopic shelves Hot soapy water: Clean with a dish cloth or a brush. Do not soak or clean in the dishwasher. Accessories Hot soapy water: Soak and clean with a dish cloth or brush. 12 Detaching and refitting the rails The rails can be removed for cleaning. The oven must have cooled down. Detaching the rails 1. Lift up the front of the rail 2.and unhook it (figure A). 3. Then pull the whole rail forward 4. and remove it (Fig. B). Clean the rails with cleaning agent and a sponge. For stubborn deposits of dirt, use a brush. Refitting the rails 1. First insert the rail into the rear socket, press it to the back slightly (figure A), 2. and then hook it into the front socket (figure B). The rails fit both the left and right sides. The kinked section must always be at the bottom. Detaching and attaching the oven door For cleaning purposes and to remove the door panels, you can detach the oven door. The oven door hinges each have a locking lever. When the locking levers are closed (figure A), the oven door is secured in place. It cannot be detached. When the locking levers are open in order to detach the oven door (Fig. B), the hinges are locked. They cannot snap shut. a=Risk of injury! Whenever the hinges are not locked, they snap shut with great force. Ensure that the locking levers are always fully closed or, when detaching the oven door, fully open. Detaching the door 1.Open the oven door fully. 2.Fold up the two locking levers on the left and right (figure A). 3.Close the oven door as far as the limit stop. With both hands, grip the door on the left and right-hand sides. Close the door a little further and pull it out (figure B). Attaching the door Reattach the oven door in the reverse sequence to removal. 1.When attaching the oven door, ensure that both hinges are inserted straight into the opening (figure A). 2. The notch on the hinge must engage on both sides (figure B). 3.Fold back both locking levers (figure C). Close the oven door. a=Risk of injury! If the oven door falls out accidentally or a hinge snaps shut, do not reach into the hinge. Call the aftersales service. Rem o vin g a n d in s t allin g t h e d o o r p a n e ls To facilitate cleaning, you can remove the glass panels from the oven door. 1. Detach the oven door and lay on a cloth with the handle facing down. 2. Unscrew the cover on top of the oven door. To do this, undo the left and right screws (figure A) . 3. Lift the panel, and pull it up and out (figure B) . . . Clean the panels with glass cleaner and a soft cloth. Do not use sharp or abrasive materials or a glass scraper. The glass could be damaged. 4. Insert the panel diagonally towards the back. The smooth surface must face outwards. 5. Put the cover back in place and screw it on. 6. Attach the oven door. Do not use the oven again until the panels have been correctly fitted. Troubleshooting Malfunctions often have simple explanations. Refer to the table before calling the after- sales service as you may be able to remedy the fault yourself. Malfunction table If a dish doesn't turn out as well as you had hoped, refer to the section Tested for you in our cooking studio, where you will find plenty of cooking tips and tricks. Problem Possible cause Remedy/ information The oven does The circuit Look in the fuse box and not work. breaker is check that the circuit defective. breaker is in working order. Power cut Check whether the kitchen light or other kitchen appliances are working. 0 and zeros Power cut Reset the clock. light up in the display. The oven does There is dust on Turn the control knobs back not heat up. the contacts. and forth several times. Error messages If an error message with “ appears, press the 0 button. The message disappears. A time function that has been set is cleared. If the error message does not disappear, please contact the after- sales service. You can take remedial action yourself if the following error message is displayed. Error message Possible cause Remedy/ information “‹ ‚ ‚ A button was depressed for too long or is covered up. Press all buttons individually. Check whether any buttons are jammed, covered up ...

Ce manuel est également adapté pour les modèles :
Fours - HBA23B160R/35 (2.36 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories