Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
9. COAXIAL DIGITAL AUDIO OUTPUT 10. 120V~60Hz This unit comes with an AC power cord. Be sure its prongs are dry before plugging it into an electrical outlet. Take caution not to overextend the cord or walk on it. 11. COMPONENT VIDEO OUTPUT 12.OPTICAL OUTPUT 6 7 10 2 4 5 8 9 12 11 1 3 Language Video Audio More Aud Rating Digital Out PCM PCM PCM Analog Out 5.1 channel 5.1 channel 5.1 channel PCM Raw Off Others Setting Follow these steps to set the outgoing analog and digital audio format of others tracks: A. From Stop mode, press SETUP. B. Select Audio and press ENTER. C. Select Dolby D and press ENTER. D. Set Analog out to: 2 Channel (default) to output 2 channel stereo audio from the stereo audio output; e.g.,to a VCR or TV. E. Set Digital out (from Optical out) to: PCM (default) to output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g.,to a Minidisc recorder. Raw to output the raw 2 channel digital bitstream form th optical/coaxial digital audio outputs; e.g., to an external amplifier. Off to disable CD others audio output. F. Press SETUP to save and exit. AC3 MP3/WMA Others 5.1 channel 2 channel Off 5.1 channel 2 channel Off MP3 Setting Follow these steps to set the outgoing digital audio format of MP3 tracks (Note: The analog format is fixed to 2 channel ): A. From Audio mode, press SETUP. B. Select Audio mode, press ENTER. C. Select MP3 and press ENTER. D. Set Digital out to: PCM (default) to output 2 channel digital from the optical/coaxial digital audio outputs; e.g.,to a Minidisc recorder. Off to disable MP3 digital output. E. Press SETUP to save and exit. Language Video Audio More Aud Rating Digital Out PCM PCM PCM Analog Out 5.1 channel 5.1 channel 5.1 channel PCM Raw Off AC3 MP3/WMA Others 1. POWER Before plugging the power cord into the AC outlet, check to make sure all of the connections have been properly completed. When they have been, carefully plug power cord into outlet. Press the POWER button on the front panel to power the unit. When the unit is initially powered, a brief surge of electricity may cause interference with other electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different circuit. . OPEN/CLOSE Use this button to open and close the disc tray while in DVD mode. When in the Tuner mode, this button is used to select preseting or tuning mode. 3. PLAY /AUTO Use this button to begin play function while in DVD mode. When in the tuner mode, you may press this button for automatic search.. 2 4. PAUSE/DOWN Use this button to pause play function while in DVD mode. While in the tuner mode, you may press this button for radio down search. 5. STOP /UP Button. Use this button to stop play function while in DVD mode. While in the tuner mode, you may press this button for radio up search. 6. INPUT SIGNAL SOURCE Use this button to select the proper input signal source. (Note: The selected input will correspond to the selected input terminal on the rear panel.) 7. VOLUME Use this button to control the unit's volume. It controls all six channels simultaneously. 1 2 3 4 5 6 7 REMOTE CONTROLLER SYSTEM SETUP REMOTE CONTROLLERSYSTEM SETUP Select [Video Output], and press ENTER or to display the [Video Out] submenu: A. Press ENTER to confirm B. Press SETUP to exit the Setup Menu Note: The Composite video and S-video output is always available. [S-Video] -Select if you connected the DVD player to your TV using the composite Video output. [YUV] -Select if you connected the DVD player to your TV using the YUV output. [Y Pb Pr] -Select if you connected the DVD player to your TV using progressive scan. Press to change your selection Language Video Audio More Aud Rating TV Shape TV System Video Output S-Video YUV 4:3 PS NTSC S-video Audio Setup The Audio menu allows you to set the analog and digital audio outputs to correspond with the external components you have connected to the player. For example, if you connected the player to a TV using the Stereo Audio jacks, you should set Dolby Digital and others settings to 2 channel to enjoy downmixed stereo audio. You can set the audio format for each of the following sources: Dolby Digital, MP3, CD and Others. DVD playback must be stopped in order to adjust the Audio setup. 22 AC-3 Setting Follow these steps to set the analog and digital audio formats of outgoing Dolby Digital 5.1 soundtracks: A. From Stop mode, press SETUP. B. Select Audio and press ENTER. C. Select Dolby D and press ENTER. D. Set Analog out to: 6 Channel (default) to output Dolby Digital 5.1 channel audio from the 5.1 channel analog audio outputs; e.g., to a 5.1 channel amplifier. 2 Channel to output downmixed 2 channel stereo from the stereo audio outputs; e.g., to a VCR or TV. E. Set Digital out to: AC3 MP3/WMA Others Digital Out PCM PCM PCM Analog Out 5.1 channel 5.1 channel 5.1 channel Language Video Audio More Aud Rating PCM Raw Off 5.1 channel 2 channel Off PCM (default) to output 2 channel digital from the optical/...