Log:
Évaluations - 4, GPA: 4.3 ( )

Instructions Hitachi, Modèle VT-MX411AC

Fabricant : Hitachi
Taille : 755.38 kb
Nom Fichier : 74909e07-5872-4f8e-9364-235f7fd21dc7.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


• Auto counter reset- (when inserting a tape) • Auto rewind when the end of a tape is reached- (not in the case of timer recording). • Direct Button Operation- When a tape is in the VCR and the power is off, just press PLAY, REW or F.FWD button on the main unit and it will automatically turn on the VCR and playback, rewinding or fast-forwarding will start immediately (not in the case of timer recording). • 2 Step Picture Search Operation- You can view a video program at a high speed or super hihg jspeed in either a forward or reverse direction in LP and SLP mode. • Still- "Freeze" the picture at any time, for close viewing of a particular scene. Only tapes recorded in SLP mode will show a fairly clear picture. • Digital Auto Tracking (DTR)- Adjusts the tracking automatically for each tape you play. • Auto Repeat- Allows you to repeat a tape indefinitely without pressing the PLAY button. • Rental Play Mode- Improves playback picture quality of worn tapes, especially rental tapes. • Three different tape speeds: SP/LP/SLP • IRT (Instant Recording Timer)- Instant timed recording from 30 to 480 minutes possible at the push of REC/IRT button. • 1 Year, 7 events (including Daily and Weekly Timer Recording)- The built-in timer allows you to record up to 7 programs at different channels up to 1 year in advance. The daily timer allows recordings to be made of daily broadcasts, and the weekly timer allows recording to be made once a week up to the end of the tape. • Auto Return- After finished timer recording, the beginning of the recorded program(s) can be searched. • Time Search- Lets you set the VCR to advance the tape by entering the desired playbck time you want to skip. • Blank Search-Lets you set the VCR to search for an unrecorded portion on the tape. • Index Search-Lets you Index the start of a recording. • Edit Search- Lets you set the VCR to edit an unwanted segment of a recording. • Just-In-Time Recording- Measures the remaining tape and automatically adjusts the tape speed so that the automatic timer recording fits on a cassette. • Remaining Tape Running Time Display-You can check the remaining running time of your FEATURES tape. • Slow Motion- You can view the video program at a slower than normal playback speed. Slow speed can be controlled by pressing F.FWD button (faster) or REW button (slower). VIDEO CASSETTE VIDEO CASSETTE This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS • Avoid moisture, which can condense on the tape if it is moved from a cold place to a warm place. Before using a tape with these conditions, to avoid damage to the tape and your VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. THREE DIFFERENT TAPE SPEEDS Before recording, select the tape speed from: SP mode (Standard Play), LP mode (Long Play) or SLP mode (Super Long Play). The table below shows the maximum recording/playback time using T60, T120, or T160 tapes in each mode. INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the VCR. The VCR will automatically turn on. REMOVING A CASSETTE 1) In the Stop mode, press STOP/EJECT button on the VCR. The cassette will eject. 2) Pull the cassette out of the cassette compartment. 3) Store the cassette in the case as shown. VIDEO CASSETTE ERASE PREVENTION You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette. If you decide to record on the tape again, cover the hole with plastic tape. OPERATING CONTROLS AND FUNCTIONS OPERATING CONTROLS AND FUNCTIONS FRONT VIEW illustration REMOTE CONTROL VIEW illustration 1. Cassette Compartment 2. REW button- Press to rewind the tape, or to view the picture rapidly in reverse during the playback mode. (Rewind Search) 3. PLAY button- Press to begin playback. 4. F.FWD button- Press to rapidly advance the tape, or view the picture rapidly in forward during playback. (Forward Search) 5. PAUSE button- Press to temporarily stop the tape during recording or to view a still picture during playback. Frame Advance Function- Press to advance the picture by one fram during the still mode. 6. STOP button-Press to stop the tape motion. EJECT button- Press to remove a tape from the VCR (only on the VCR) 7. REC button- Press to begin manual recording. IRT button- Press to activate Instant Recording Timer. (only on the VCR) 8. CHANNEL buttons- Press to select desired channels for viewing or recording. SET function- Press to enter digits when setting program (for example: setting clock or timer program). Press to select setting modes from on screen menu. Tracking function- Press to minimize video 'noise' (li...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories