Évaluations - 2, GPA: 5
(
)
)
|
Facilité d'utilisation
The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital program sources. If you play DVDs with the “ ” mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. When playing recordings of live or classical music, this mode provides a feeling similar to actually being in a small concert hall. When playing recordings of live or classical music, this mode provides a feeling similar to actually being in a large concert hall. This mode provides a three dimensional effect similar to that of a movie theater. II Dolby Pro Logic II creates five full-bandwidth output channels from two-channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. Pro Logic II offers the following five modes: PROLOGIC Emulation mode: The Pro Logic Emulation mode offers users the same robust surround processing as original Pro Logic, in case the source content is not of optimum quality, or if there is a desire to hear the program more “as it used to be.” When this mode is used, it is called Pro Logic, as before. There is no “Pro Logic I” mode. The Pro Logic emulation mode is optional. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced sound field directionality that approaches the quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use with any stereo music recordings, and provides a wide and deep sound space. The Music mode includes controls that allow the sound to be tailored to individual listening tastes. VIRTUAL mode: The Virtual mode is usually used when Pro Logic II is connected to a virtual process for speaker use. However, there might be some virtualizers for which this mode does not produce the intended result. For those virtualizers, Movie mode may give the best surround effect. Virtual mode is designed to be used with the virtual process developed by Dolby Laboratories. The Pro Logic II mode should be called only “Pro Logic II” so the Virtual name can be reserved to describe the speaker virtualization process itself. MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem “larger.” The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate “cure” for poor FM stereo reception may be simply to force the audio to mono. SURROUND OFF (2CH STEREO) Outputs the sound from the front left and right speakers and subwoofer. Standard two channel (stereo) sources completely bypass the sound field processing. This allows you to play any source using only the front left and right speakers and subwoofer. You can select SURROUND OFF by pressing BY PASS on the remote control. 16 Amplifier Setup (Continued) Amplifier Setup (Continued) Sound Mode You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. Each time you press the SOUND EFFECT button, the sound mode is changed in the following order: PROLOGIC > HALL 1 > HALL 2 > THEATER ote For DVDs, you can only select sound modes when the PCM indicator is shown on the front panel display. Each time you press the button, the Pro Logic II sound mode is changed in the following order: PROLOGIC > MOVIE > MUSIC > VIRTUAL > MATRIX Tip You can quickly select SURROUND OFF (2CH STEREO) mode by pressing the BY PASS button. When DVD is inserted: You can change the sound mode of a DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback. Although DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. Each time you press the AUDIO button, the sound mode of DVD is changed in the following order: > > and When a DVD is inserted and the PROLOGIC II indicator lights: Each time you press the button, the Pro Logic II sound mode is changed in the following order: PROLOGIC > MOVIE > MUSIC > VIRTUAL > MATRIX Tip You can set PRO LOGIC II mode to Off (2CH STEREO) by pressing the BY PASS button (the PROLOGIC II indicator disappears). For your reference: • The DVD+VCR memorizes the last mode settings for each source individually. • The encoding format of discs is usually printed on the packaging. -Dolby Digital discs are labeled with the logo. -Dolby Surround encoded programs are labeled with the logo. -DTS Digital Surround discs are marked with DTS. ote When you play sound tracks with a 96kHz sampling frequency, the output signals will be converted to 48kHz. Sound Le...
Ce manuel est également adapté pour les modèles :Lecteur DVD - HT2015 (1012.62 kb)