Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Attention! If data from the GUIDE PLus+® system were loaded, you can not change the clock/date because this information was taken from the GUIDE Plus+® system. Therefore you can not select this function. 1 1 Press SYSTEM-MENU on the remote control. The menu bar will appear. 2 2 Select 'A' using D or C . 3 3 Select line 'Installation' using CH-B or ACH+ and confirm with C . 4 4 Select line 'Time/Date' using CH-B or ACH+ and confirm with C . a'Not allowed'will appear on the TV screen b The time/date will automatically be taken from the EPG information. Therefore you can not set the time/date manually. Problem 5 Select 'Manual' with CH-B or ACH+ . 6 7 8 Confirm with OK . Change the time in line 'Time' using the number buttons 0..9 on your remote control. Check 'AM/PM', 'Year', 'Month', and 'Date' in the same way. To select between the fields, use CH-B or ACH+ . Change the information with D , C or the number buttons 0..9 . 9 Select one of the following settings in line 'Daylight Saving': 'On': The time set corresponds to the summer time (summer time is on) 'Off': The time set corresponds to the winter time (summer time is off) 11 11 10 10 When all settings are correct, confirm with OK . To end, press SYSTEM-MENU . If the setting has been confirmed with OK the automatic system is disabled. Time/DateManualTime09:02AM/PMAMYear2003Month01Date01DaylightSavingOffToexitpressSYSTEMMENU Installing your DVD Recorder EThe GUIDE Plus+®system General information Your DVD Recorder is equipped with the GUIDE Plus+® system. The GUIDE Plus+® system offers a free interactive electronic program guide that lists all the TV programs available in your area. You can also use the GUIDE Plus+® system to program your DVD Recorder to record your favorite shows. Press GUIDE/TV to see a summary of all the TV programs currently being shown on the various TV channels. You can select either all the shows at a particular time or sorted according to category. For the GUIDE Plus+® system to operate correctly, the necessary data has to be collected. The DVD Recorder may take up to 24 hours to do this. Please note the following. •) All the TV channels must already have been installed. •) The TV channel which transmits the GUIDE Plus+® system information must not be deleted from the channel list. •) The time and date must have been set •) The antenna/cable network must be connected; it must be possible to receive TV channels. •) The DVD Recorder must be connected to the mains •) The DVD Recorder must be switched to standby with the STANDBY m button. •) The Demo Pin on the back must be removed (jack G-LINK ) •) If you have connected a cable box it must be switched on. Setting up the GUIDE Plus+® system Below you will find out how to set up the GUIDE Plus+® system to suit your own particular needs and how to install a cable box if you have one. If the GUIDE Plus+® system has not yet been set up, go directly to step 4 . 1 1 Switch on the TV. If required, select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel). 2 2 Press the GUIDE/TV button on the remote control. The 'LISTINGS' screen will appear aA Set?up screen will appear b The GUIDE Plus+® system is not completely installed, or the installation was aborted. Chose from the following options and follow the instructions on the screen: 'Set up GUIDE now':Installation of the GUIDE Plus+® system 'Set up GUIDE later': If you choose this option the 'reminder screen' will appear every time you switch on the DVD Recorder. 'Don't remind me again': Select this option if you do not want to set up the GUIDE Plus+® system now. Please note, that without a complete installation of the GUIDE Plus+® system it ENGLISH is not possible to make a programmed Problem recording. 33 The GUIDE Plus+ 3 3 Press ACH+ . Select then 'SETUP' with the C or D button. Use CH-B , ACH+ to select 'Change system settings'. Confirm with OK . 4 4 Use CH-B , ACH+ to select 'No, repeat setup process'. 5 5 Confirm with OK . Use ACH+ , CH-B to select your country. 6 6 Confirm with OK . 7 7 Enter the postal/zip code where the DVD Recorder is being set up. Why do I have to enter the postal/zip code? For the GUIDE Plus+® system to operate correctly, it needs to know its current location and the TV channels available at that location. The DVD Recorder works this out automatically on the basis of the postal/zip ? code and country. 8 8 Confirm with OK . 9 9 Does your TV have an antenna or a cable connection? 'Cable service''No': Antenna 'Cable service''Yes': Cable connection Was is the difference between cable and antenna? The difference is that they have different channel line up's. In the antenna setting, only channels from 2 to 69 can be entered. In the cable setting, ? however, channels 1 to 125 can be entered. 10 10 Confirm with OK . If you selected 'Cable service''No', there is nothing else you need to do here. Read on in the section entitled 'Finalize set-up'. Otherwise, you should continue here. 11 11 Di...