Log:
Évaluations - 2, GPA: 5 ( )

Instructions Toshiba, Modèle D-R400

Fabricant : Toshiba
Taille : 10.84 mb
Nom Fichier : e53bd244-6bdd-aae4-89b6-5e980dd3c6d0.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


2 Use [K / L] to select “New Program”, then press [ENTER]. Timer Programming 1/1 MON JAN/01 10:00AM Date Start End L1/L2 New Program • If there are 6 or more programs, use [SKIP H / G] to change pages. You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Set the clock before setting a timer programming. • Insert a recordable disc with enough recordable space. Note • If you have not set the clock yet: “Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 3 in “Clock Setting” on page 25 before setting a timer programming. • Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu. • Timer recording will not work when the power is on. • When power is on, programs registered for recording in timer recording will be automatically cleared after the end time and date have passed. SE-R0265 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TOP MENU CLEAR RETURN MENU/LIST WXYZ JKL MNO DEF ENTER SKIP REV PLAY REPEAT REC MODE REC ZOOM PAUSE TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP STOP FWD SKIP TIMER PROG. SATELLITE LINK OPEN/ CLOSE GHI PQRS TUV SPACE WXYZ JKL MNO STOP ENTER .@/: ABC DEF PLAY TIMER PROG. Guide to Timer Programming Display Timer Programming 1/1 SP (1:00) MON JAN/01 10:00AM JAN/ 2/07 12:00 AM L1 SP Date Start End L1/L2 JAN/02 12:00AM 1:00AM L1 New Program 1 5 3 4 2 1. Title of a timer program (Contains date, time, external input, recording mode of the program) 2. Current date and time 3. Recording mode and length of the recording 4. Timer program list 5. Total number of pages and current page (2 pages maximum) E7E7AUD_EN.indb 37 2007/01/29 19:03:56 38 EN 3 Use [K / L] to enter the date, then press [B]. Timer Programming 1/1 MON JAN/01 10:00AM Date Start End L1/L2 Date New Program JAN/02 L1/L2 Mode SP SP 2 : 00 Start - - : - - End - - : - - L1 Daily MON-SAT JAN/01 JAN/31 MON-FRI SAT FRI SUN 4 Use [K / L / { / B] or [the Number buttons] to enter the start and end time, then press [B]. 1/1 Date New Program JAN/02 L1/L2 Mode SP SP 2 : 00 Start 12 : 00AM End - - : - - L1 5 Use [K / L] to select the appropriate external input position (L1/L2) to which your cable/satellite box is connected, then press [B]. 1/1 Date New Program JAN/02 L1/L2 L1 Mode SP SP 1 : 00 Start 12 : 00AM End 1 : 00AM 6 Use [K / L] to select a recording mode. 1/1 Date New Program JAN/02 L1/L2 Mode SP SP 1 : 00 Start 12 : 00AM End 1 : 00AM L1 Refer to “Recording Mode” on page 34. • You can check the remaining recordable space of the disc when you select the recording mode. Date JAN/02 L1/L2 Mode SP SP 1 : 00 Start 12 : 00AM End 1 : 00AM L1 Auto recording mode select... When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program. 1/1 Date New Program JAN/02 L1/L2 Mode Auto Auto 1 : 00 Start 12 : 00AM End 1 : 00AM L1 • “Auto” is only available for one program in the timer program list. • The recording may be cut short, when the available recording space of the disc is too limited. 7 Press [ENTER] when all items are entered. Your program setting will be stored. • To set another program, repeat steps 2 to 7. • To exit, press [TIMER PROG.] or [SETUP]. • When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue. To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 39. 8 Press [I/y ON/STANDBY] to set a timer programming. indicator will appear on the front panel display, while this unit waits to make the recording. TIMER RECORDING When pressing [L] at the current date, the date will change as follows. e.g.) January 1st E7E7AUD_EN.indb 38 2007/01/29 19:03:57 EN 39 MaDniasgce ment Recording Playback Introduction Connections Basic Setup Editing Function Setup Others Checking, canceling, or correcting the timer programming information If the timer program did not complete correctly, the error number appears in the timer programming list. 1) Press [I/y ON/STANDBY]. 2) Press [TIMER PROG.]. 3) Check the information on the list you want to edit. Timer Programming 1/1 SP (1:00) MON JAN/01 10:00AM JAN/ 2/07 12:00 AM L1 SP Date Start End L1/L2 JAN/02 12:00AM 1:00AM L1 New Program 4-A) To delete the timer program: 1 Use [K / L] to select the program you want to delete, then press [ENTER]. 2 Use [K / L] to select “Delete”, then press [ENTER]. Selection menu will appear. 3 Use [K / L] to select “Yes”, then press [ENTER]. 4-B) To correct the timer program: 1 Use [K / L] to select the program you want to correct, then press [ENTER]. 2 Use [K / L] to select “Program Change”, then press [ENTER]. 3 Correct the timer program by using [K / L / { / B], then press [ENTER]. 5) Press [TIMER PROG.] to exit....


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories