Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Home Theater Note Note If the audio output of the other equipment is monaural, connect to If audio output on the other equipment is monaural, use a stereo- L/MONO. (Both left and right channels are recorded when connect-monaural conversion cable (not included). ed through L/MONO.) 79 RQT6035 Expanding your home theater system When you can’t directly connect the antenna you disconnected from your television to the unit When you can’t directly connect the included 75 coaxial cable to the television Check the type of antenna input on your television and make the Use the connection that suits the type of terminal. appropriate connection. RQT6035 Home Theater from the antenna If there is a twin lead and a coaxial cable If there are two twin leads from the antenna from the antenna (Flat) Twin lead 300 cable (Round) 75 coaxial cable 300–75 transformer (not included) VHF/UHF band mixer (not included) VHF/UHF band mixer (not included) 300–75 transformer (not included) To this unit’s RF IN terminal To this unit’s RF IN terminal To this unit’s RF IN terminal If your television has both post and plug-type VHF terminals, the post connection is recommended to minimize signal loss. If it is a twin lead (Flat) Twin lead 300 cable (Flat) Twin lead 300 cable VHF/UHF band separator (not included) Television If it is a screw type terminal 75–300 transformer (not included) Television 75 coaxial cable If it is a double screw type terminal Television VHF/UHF band separator (not included) If it is a complex TV terminal Connect to one of the ANT terminals and select the same antenna number on the television. If it is a screw & plug type terminal VHF UHF VHF or UHF Television Split out ANT 1 ANT 2 VHF UHF 80 Expanding your home theater system Operating other Panasonic DVD equipment with the remote control !? TV CH TV/AV PROG / CHECK TOP WINDOW FRAME SKIP STOP VCR Plus+ REC TIME SLIP CM SKIP V.S S ACTION TVDVD AUDIO ADD/DLT REC MODE CANCEL INPUT SELECT LAST MARKER MARKER WRITE CH DVD 1 2 3 4 5 6 7 8 9 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOL POWER POWER OPEN/CLOSE TCERID ROTAGIVANTOPMENU MENU DISPLAY TSILYALP 100 POWER 1 2 3 DVD, TV POWER INumbered buttons By changing the remote control code, you can operate other DVD recorders and players manufactured by Panasonic. Most of the DVD recorders and players manufactured by Panasonic use the same system for their remote controls, so if you operate them in the same place, the controls can be confused by the different pieces of equipment. Use the following procedure to change the remote control code to solve this problem. Use “1”, the factory set code, under normal circumstances. Be sure to set the same remote control code on the main unit as you did for the remote control itself (. page 82, ACTION—Set Up— Remote Control Code). Preparation Switch [DVD, TV] to “DVD”. Change the code on the main unit. Press [, POWER] and the numbered buttons corresponding to the code you want to set, [1], [2], or [3], at the same time. Note The following display appears on the unit’s display if its code and the remote control’s code are different. Change the remote control’s code to suit the unit. Home Theater The unit’s remote control code The display disappears after about 5 seconds. 81 RQT6035 Changing the unit’s settings Summary of settings This chart shows the initial settings for this unit. See page 85 for details on menu operation. Underlined items are the factory presets. Initial settings Options 2 hr 6 hr Off Set Code 1 Set Code 2 Set Code 3 1 0 1 TV CATV Yes No English French Spanish Original Other Automatic English French Spanish Other English French Spanish Other Setting ratings (When level 8 is selected) 8 No Limit: All DVD-Video can be played. 1 to 7: Prohibits play of DVD-Video with corresponding ratings recorded on them. 0 Lock All: Prohibits play of all DVD-Video. Changing ratings (When level 0–7 is selected) Unlock Recorder Change Level Change Password Temporary Unlock On Off Automatic Fixed Automatic Field Frame Lighter Darker On Off Menus Off Timer Select how long the unit remains on when it is not being used. Remote Control Code Change the remote control code so you can use other Panasonic DVD equipment at the same time. Clock Settings Auto Clock Setting (. page 87) The unit adjusts the clock automatically. Manual Clock Setting (. page 88) You can adjust the clock. Time Zone Adjust (. page 89) Adjust the time zone if it was not set correctly after auto clock setting. This appears only after auto clock setting is complete. Channel Settings Antenna System (. page 90) Select to suit the type of antenna you are using. Channels are set corresponding to the antenna system you select. Auto Channel Setting (. page 91) The unit sets the channels automatically. Preset Channel Caption Manual Channel Caption (. page 92) Give captions to the channels. VCR Plus CH Setting (. page 19) Set the guide channels for use with VCR Plus timer recording. Re-initialize Setting This returns all val...
Ce manuel est également adapté pour les modèles :Lecteur DVD - DMR-E20 (6.91 mb)