Évaluations - 3, GPA: 4 ( )

Fabricant : Panasonic Taille : 14.86 mb Nom Fichier : DMREZ47V-MUL.PDF Langue d'enseignement:

RQT8853 31 RQT8853 Notes . If the desired audio is not recorded, select the kind of audio for “Select Audio Channel For DV Input” in the Setup menu (.. 50). . [RAM] Programs are recorded as a single item; breaks in the images create chapters. . If you use video camcorders from other manufacturer’s these are not guaranteed to work. . It is not possible to operate the unit from the connected DV equipment. . The DV equipment name may not be shown correctly. . Date and time information is not recorded, even if displayed on the camcorder. . The DV IN terminal is not meant to be connected to a computer. . This unit uses a 4-pin “DV IN” connector; Your DV camcorder may use a 4-pin or 6-pin external connector. Please consult your DV camcorder’s manufacturer to confi rm correct external connection. . You cannot record discs and play discs simultaneously. Connect the cable while the power to both the unit and the external device is off. Front on the unit IN 2 S VIDEO VIDEO L /MONO AUDIO R 4-pin DV Cable [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] DRIVE SELECT to select the DVD drive. – External DV cannot be recorded to VHS. REC MODE to select the recording mode for the disc (.. 14). Insert a disc. Turn on the DV equipment and pause play on the DV equipment at the point you want recording to start. DV connection detected. Record to DVD Cancel ENTER DV camcorder connection Start recording? “DV camcorder connection” screen may appear. . to select “Record to DVD” then ENTER . to select “Rec.”, then ENTER Recording from a DV Camcorder Tips When recording fi nishes The confi rmation screen appears. Press [ENTER] to fi nish DV camcorder recording. To stop recording Press [. STOP]. The confi rmation screen appears. Press [ENTER]. . If the DV camcorder recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on. If that does not work, follow the instructions on page 30. Preparation: . Turn on the unit. . [RAM] If the disc is protected, release protection (.. 44). When “DV camcorder connection” screen does not appear Perform steps 1–4 (.. above). 1. With the unit stopped Press [FUNCTIONS]. 2. Press [., .] to select “Other Functions” then press [ENTER]. 3. Press [., .] to select “DV Camcorder Rec.” then press [ENTER]. You can proceed to step 6 (.. right). Advanced Features Linked Operations with the TV (EZ Sync TM “HDAVI Control TM”) 32 You can enjoy linked operations with the TV and receiver by using “HDAVI Control”. Preparation 1. Connect this unit to your TV or receiver with an HDMI cable (.. 61). 2. Set “EZ Sync” to “On” (.. 51). (The default setting is “On”.) 3. Set the “HDAVI Control” operations on the connected equipment (e.g., TV). .When using HDMI2 terminal of VIERA as “HDAVI Control”, set the input channel to HDMI2 on VIERA. 4. Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control” function works properly. When the connection or settings are changed, repeat this procedure. .1 This button is available only when this unit is on. .2 When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents from where playback started. In this case, press [.] or [.] to go back to where playback started. .3 Depending on discs, the TV may not automatically turn on. (When the TV is on) Automatic input switching When the TV is on and the following operations are performed, the TV’s input will automatically switch to HDMI input mode and the TV displays the corresponding action. (Picture or sound may not be available for the first few seconds.) Press [FUNCTIONS].1, [..PLAY].2, [DIRECT NAVIGATOR], [SCHEDULE], etc. .If you operate the VHS when the unit is recording on the DVD drive, the output does not automatically switch. (When the TV is off) Power on link When the TV is off and the following operations are performed, the TV will automatically turn on and displays the corresponding action. (Picture or sound may not be available for the first few seconds.) Press [..PLAY].2, [DIRECT NAVIGATOR], [SCHEDULE], etc. .[DVD-V].3, etc. The TV is automatically turned on when you insert the discs or a tape without the accidental erasure prevention tab. .If you operate the VHS when the unit is recording on the DVD drive, the TV does not automatically turn on. Power off link When you turn the TV off, this unit is also automatically turned off. This unit automatically turns off even if the FUNCTIONS screen, the status message or the on-screen menu is displayed, during playback. Even if the TV is turned off, this unit will not turn off at the same time under the following conditions: –when you press [. REC] and this unit is recording –when scheduled recording is proceeding –when copying –when finalizing, etc. .When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, the receiver will also tur...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :