Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
20, 23 FAST FORWARD /SEARCH/ SKIP p. 20, 23 Reset All Memory Functions p. 22 Returns to factory setting. Use if relocating DECK, or if Initial Setup needs to be redone. • Make sure a tape is not inserted in the DECK. 1 Turn DECK Power on. 2 Press and hold both VCR PLAY and CHANNEL on the DECK for more than 5 seconds. • The power shuts off. 3 Perform “Initial Setup (Ready to Play)” on page 16. 1 112 9 Location of Controls (continued) Rear View of DECK Bold: VCR Function Italic: DVD Function Bold Italic:VCR and DVD Functions AC Power Plug VHF/UHF Antenna Output Terminal S-Video Out Connector (DVD Only) pp. 10, 13 Component Video Output Connector (Y, PB, PR) (DVD Only) p. 13 Audio Output 2 Connector (L/R) p. 13 Optical Digital Audio Output Connector (DVD Only) p. 15 Video Input Connector p. 35 Video Output Connector p. 12 Audio Output 1 Connector (L/R) p. 12 VHF/UHF Antenna Input Terminalp. 12 p.12• While plugged into an AC outlet, this DECK consumes 0.85 W of electrical power in off mode. Audio Input Connector (L/R) p. 35 The following table shows the status of the output jacks when in VCR or DVD mode. Video Output Audio Out 1 Audio Out 2 Component Video Output S-VIDEO OUT VCR YES N/A N/A DVD YES YES Note • PROG functions on the remote are not available when using Component Video Output and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG. To enjoy PROGRESSIVE SCAN video (1). Connect Component Video Output to the component video input terminals of a television. (See p. 13.) (2). When PROGRESSIVE OUT is set to “ON” in the DVD Main Menu (p. 55), a Progressive Scan signal is output from the Component Video Output Connector. Notes • The screen may shift off-center when using progressive output. Please adjust the screen position if this occurs. (Refer to your TV manual.) • If the television is not progressive compatible, a progressive scan picture is not available. Connect the Video Output or S-Video Output connector (see p. 12, 13) and set PROGRESSIVE OUT to “OFF” in the DVD Main Menu. (See p. 55.) 10 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:Displays (On Screen & Multi Function) On Screen Displays (VCR) Function & Channel Displays Blank Tape/ No Video Signal Indications When a function button CH 08 is pressed, e.g. PLAY, Whenever a blank section of a tape comes or you change up in Play mode, or when the selected channel has no broadcast signal with Weak channels, a 5-second Signal Display Feature (p. 33) set to OFF, display appears. the TV screen will turn solid blue. Initial Setup(Connection) Current Time Function Status VCR Status & Clock Displays To display or remove screen shown at right, Rec Time Remaining . ..... press DISPLAY. (OTR mode only, see p. 21.) Broadcast Audio Being Received (See pp. 26, 27.) Multi Function Display VCR mode Indicator Lights up when DECK is in VCR mode. Tape Indicator Lights up when a tape is inserted. Hi-Fi Indicator ANGLE Indicator recorded at different angles is detected. (See p. 37.) (DVD only) Clock/ Status/ Channel/ Speed Display Displays current time. Briefly displays DECK status when you press a function button, channel number or “L1” or “L2” when you select channel or line input, and recording speed when you press SPEED. VCR TIMER RECHi -Fi DVD A MANGLE Lights up when a scene AM/PM Indicator Lights up when Hi-Fi audio is present in Play mode. REW 12 : 0 0AM 0 : 25 CH 02 -0 : 12 : 34 SPSTEREO SAP MONO Channel Counter Tape Speed (See p. 4.) DVD mode Indicator Lights up when DECK is in DVD mode. DISC Indicator Lights up when a disc is inserted. VCR REC Indicator Lights up during recording. Timer Indicator Lights up when DECK is set for Timer Recording, or when One Touch Recording (OTR) is used. Flashes when Timer Recording is set, but a tape has not been inserted into DECK and when a power interruption occurs during Timer Programming. 11 Connections Basic Connections • If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher quality picture and sound. • You can enjoy stereo sound even if your TV is not stereo by connecting a stereo amplifier to DECK. • Connect DECK and TV with an RF Coaxial Cable (supplied) or an AV Cable (not supplied) as shown in the figure below. a b 1 Disconnect antenna or cable from TV and connect to DECK. IN FROM ANT. OUT TO TVAUDIO IN 1OUT DVD/VCR DECK VHF/UHF R L VIDEO VHF/ UHF VIDEO IN AUDIO IN R L TV AV CABLE(not supplied) 2 Connect DECK to TV with RF Coaxial Cable. RF COAXIAL CABLE (supplied)a b DSS Receiver OUT ININ OUT IN Antenna or Cable Cable Box or DECK TV DSS Receiver DECK TV Cable Box DECK TV When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals. Note to CABLE system installer This reminder is provided to call the CABLE system installer’s attention to Article 820-40 of the NEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for pr...