Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
13 OPEN/CLOSE Opens or closes the disc tray. 14 VOLUME UP/ DOWN Adjusts volume. 15 CHANNEL UP/ DOWN or TRACKING UP/ DOWN Selects a channel. Reduces picture noise during Playback and Slow Motion. 16 INPUT Changes input source. 17 STOP/ EJECT STOP: Stops playback. EJECT: Ejects the tape. 18 VCR OpePLAY/ REPEAT PLAY: Begins playback. REPEAT: Sets to see a recording over and over. 19 ration REWIND/ SEARCH Rewinds tape and searches previous scene. Decreases slow motion speed in Still mode. 20 FAST FORWARD/ SEARCH Fast forwards tape and searches next scene. Increases slow motion speed in Still mode. 21 REC Records a program. 22 Remote Sensor Receives infrared signal from remote control. 23 REC Indicator (RED) Lights up during recording. In Rec Pause or OTR Pause mode, the Indicator flashes. 24 ON TIMER Indicator (ORANGE) Lights when the On Timer is set. 25 PROG TIMER Indicator (GREEN) Lights up when the unit is set for Timer Recording. It flashes when a Timer Recording has been set with no tape inserted, the clock is not set, or the tape is in motion. Lights up when the On Timer is set. 26 ANGLE Indicator (RED) Lights up when a scene recorded at a different angles is detected. (DVD only) For assistance, please call : 1 800 211 PANA(7262) or, contact us via the web at:13 Getting Started ..Rear View 1 AC Power Plug When plugged into an AC outlet, this unit consumes 1.5 W of electric power in OFF condition. 2 Optical digital audio output connector Outputs audio signal. (Digital) 3 Audio Output Connector (L/R) Outputs audio signal. (Analog) 4 VHF/UHF Antenna Input Terminal Input terminal for an antenna or cable box signal. 1 2 3 4 14 Connections For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:.. Antenna Connection Connect the cable from Antenna to the VHF/UHF terminal on the unit. .. Cable Connection Connect the cable supplied by your local cable company to VHF/UHF terminal on the unit. Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only. • Turn off the power supply for all com po nents before making any connections. • If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned. • Read the instruction manual for each system component care ful ly before connecting it. Notes on con nec tions Connecting the RF in Terminal Note to CABLE system installer: This re mind er is pro vid ed to call the CABLE (Cable TV) System Installer’s at ten tion to Article 820-40 of the NEC that pro vides guide lines for proper grounding and, in par tic u lar, specifies that the cable ground shall be con nect ed to the ground ing system of the build ing, as close to the point of cable entry as practical. CAUTION Or Cable Box In from CABLE Mixer VHF Antenna UHF Antenna Connecting the AV Input Terminal Connecting the AV Input Terminal Connects VCRs and other peripheral equipment • AV Input terminal is used Getting 16 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers. There are two types of connection, digital and analog. Connect an amplifier with Dolby Digital or DTS decoders to enjoy surround sound. Connect an amplifier to enjoy high-quality stereo sound with sampling frequencies of 96 kHz. .. Digital connection .. Analog connection Connecting the Audio Output Terminal OPTICAL Firmly connect the cable to the connector. Speakers (example) Please see amplifier manual for speaker requirements. Speakers (example) Amplifier Amplifier with built in Dolby Digital or DTS decoders. Check List Turn down the volume, then turn this unit, as well as other equipment to be connected, off before pro ceeding with connection. Do not block ventilation holes of any equipment and arrange it so that air can circulate freely. Enjoying digital audio output from the digital audio output con nec tor Notes on audio output from the optical digital audio output con nec tor *1 The type of audio output from the connector canbe selected by adjusting the Settings for DVDOperation. (See pages 64-65.) *2 When "LPCM" is set to OFF in the DVD Main Menu, only 48 kHz sampling/16 bit is output. When set to ON, sampling of sound qualitygreater than 48 kHz/16 bit is reduced to48 kHz/16 bit. (See pages 64-65.) Disc Sound recording format Optical digital audio output from connector DVD V Dolby Digital Dolby Digital bitstream (1-5.1 ch) or PCM (48 kHz sampling/16 bit only)*1 Linear PCM (48/96 kHz 16/20/24 bit) Linear PCM (2ch) (48 kHz sampling/16 bit only)*2 dts Bitstream or PCM (48 kHz sampling/16 bit only)*1 DVD RAM Dolby Digital Dolby Digital bitstream (1-5.1 ch) or PCM (48 kHz sampling/16 bit only)*1 Linear P...