Évaluations - 2, GPA: 3.5 ( )

Fabricant : Philips Taille : 669.52 kb Nom Fichier : Langue d'enseignement:

P55 4 Press K/Lto select PROG., then CHANNEL 055 press B. DECODER [OFF] SKIP [OFF] 5 Press K/Lor numerical key pads to select your desired programme SET=KL OR 0 – 9 END=EXIT number, then press B. • You can select programme number 01-99. 6 Press K/Lto select CHANNEL, then press B. 7 Press K/L.The System tuner will begin to search up or down automatically.When a channel is found,the System will stop searching and the picture will appear on the TV Screen. • You can select desired channel number by using numerical key pads.You must refer to the channel plan and press three digits to select the channel number. (To select channel 24, first press “0” button then press “2” and “4”). • If this is the channel you want, press B. • If you want to remove scrambled signals, press K/Lto select DECODER.Then, press Bto select [ON]. 8 Press DISPLAY/STATUS/EXIT to exit. Notes: – To confirm that a channel has been added, press the SKIP/P+ G GG/ SKIP/P-H HHbuttons. – You should select the satellite channels to be received by the satellite receiver directly on the receiver itself. Follow TV (Automatic TV channels sorting) When the automatic channel search function is activated, the TV channels are saved in a specific order.This may vary from the order of TV channels on the TV. This function changes the order of TV channels saved in the System to match that of the TV. Make sure that the System and the TV are connected by a scart cable. 1 Press VCR, then DISC/VCR MENU. SELECT KL CHOOSE B 2 Press K/Lto select TUNER SET AUTO TUNING MANUAL TUNINGUP, then press B. >FOLLOW TV 3 Press K/Lto select 'FOLLOW TV' MOVE , then press B. 4 'P:01' will appear in the System dis- END=EXIT play. I cannot switch my TV set to programme number '1' * If you have connected additional devices to socket AV2(DECODER), please disconnect these devices. Because of other connected devices, the TV set could switch to the programme number of the scart socket. 'NO TV SIGNAL' will appear in the TV screen.The System is not receiving a video signal from the TV. Check the plug on the scart cable. Check your TV's operating instructions to see which scart socket is used for video signals. If this does not help, it's not possible to use this function. Please read the section 'Sorting and Clearing TV channels manually'. 5 Select programme number '1' on the TV. 6 Confirm with Bon the System remote control.The System compares the TV channels on the TV and the System. If the System finds the same TV channel as on the TV, then it stores it at 'P01'. 7 Wait until the next number, e.g. 'P:02' appears in the display. 8 Select the next programme number on the TV, e.g. '2'. 9 Confirm with B. 10 Repeat steps 7 to 9 until you have assigned a programme number to all TV channels. 11 To end, press DISPLAY/STATUS/EXIT. English 9 E9015ED_EN.qx3 03.7.29 6:32 PM Page 10 Setting Up your System English Sorting and clearing TV channels manually After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (programme numbers) of the System.You can use this function to individually sort the TV channels already saved or to delete unwanted TV channels or those with poor reception. The clock resets automatically If you save a TV channel that transmits TXT/PDC on programme number ‘P01’,date and time will constantly be updated.As a result, time changes, i.e. daylight savings time, will be set automatically. 1 Press VCR, then DISC/VCR MENU. MOVE >P01: 02 2 Press K/Lto select 'TUNER SET P02: 03 UP' , then press B. P03: 05 P04: 10 3 Press K/Lto select 'MOVE' , then P05: 74 press B. 4 Press K/Lto select the saved TV SELECT KL CHOOSE B END=EXIT channel that you want to change. 5 Confirm with B. 6 Move the selected channel with K/Lto the programme number you want to assign. 7 Confirm with B. 8 To assign other TV channels to a programme number, repeat steps 4 to 7. 9 Confirm the assignment of the TV channel with MOVE menu. 10 To exit the MOVE menu, press DISPLAY/STATUS/EXIT. Setting the language (for VCR features) You have the option of setting one of the displayed languages for the on-screen menu (OSD). However, the System display will only display English text regardless of this setting. 1 Press VCR, then DISC/VCR MENU. 2 Press K/Lto select 'INITIAL SET UP' , then press B. 3 Press K/Lto select 'LANGUAGE', then press B. 4 Select the desired language with K/L. 5 To end, press DISPLAY/STATUS/EXIT. SELECT KL > ENGLISH FRANCAIS ESPANOL DEUTSCH ITALIANO SVENSKA NEDERLANDS END=EXIT P06: 90 P07: 99 P08: 121 P09: 124 P10: 130 Setting the clock If the display shows an incorrect time or ' --:-- ', the time and date must be reset manually. If a TV channel that transmits TXT/PDC (teletext/PDC) is stored under programme number 'P01', time/date will automatically be taken from the TXT/PDC information. (SMART CLOCK) 1 Press VCR, then DISC/VCR MENU. 2 Press K/Lto select 'INITIAL SET UP' , then press B. 3 Press ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :