Évaluations - 4, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Settings and Adjustments 16:9 Select this when connecting to a wide-screen TV or TV with a wide mode function. 4:3 Letter Box Select this when connecting to a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 Pan Scan Select this when connecting to a 4:3 screen TV. Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit. ,continued 16:9 4:3 Letter Box 4:3 Pan Scan b Note Depending on the disc, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan Scan” or vice versa. Pause Mode (HDD/DVDs only) Selects the picture quality in pause mode. Auto The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. Frame The picture, including subjects that do not move dynamically, is output in high resolution. Component Out Selects whether or not to output video signals from the COMPONENT VIDEO OUT jacks. On Outputs the component video signals. Select this when you want to view progressive signals. Off Outputs no signals. b Notes • When you set “Line1 Output” to “RGB,” you cannot set “Component Out” to “On.” • When you connect the recorder to a monitor or projector via only the COMPONENT VIDEO OUT jacks, do not select “Off.” If you select “Off” in this case, the picture may not appear. Progressive Mode DVD software can be divided into two types: film based software and video based software. Video based software is derived from TV, such as dramas and sit-coms, and displays images at 30 frames/60 fields (25 frames/50 fields) per second. Film based software is derived from film and displays images at 24 frames per second. Some DVD software contains both Video and Film. In order for these images to appear natural on your screen when output in PROGRESSIVE mode (50 or 60 frames per second), the progressive video signal needs to be converted to match the type of DVD software that you are watching. You can fine-tune the progressive 525p/625p video signal that is output when you press PROGRESSIVE (“PROGRESSIVE” lights up). Note that you must connect to a progressive format TV using the COMPONENT VIDEO OUT jacks (page 14). Auto Automatically detects the software type (Film-based or Video-based) and selects the appropriate conversion mode. Normally select this position. Video Fixes the conversion mode to the mode for Video-based software. Scart Setting Sets the method of inputting/outputting signals from the SCART jacks on the rear panel of the recorder. Select an option for each of the items below according to the combination of jacks and methods that you are going to use. Line1 Output Selects a method of outputting video signals for the LINE 1 – TV jack. RGB Outputs RGB signals. Video Outputs video signals. S Video Outputs S-video signals. b Notes • If your TV does not accept S-video or RGB signals, no picture appears on the TV screen even if you select “S Video” or “RGB.” See the instructions supplied with your TV. • You cannot select “RGB” when “Component Out” above is set to “On.” • SMARTLINK is available only when “Video” is selected. Line3 Input Selects a method of inputting video signals for the LINE 3/DECODER jack. The picture will not be clear if this setting does not match the type of video input signal. Video/ RGB Inputs video signals or RGB signals. Decoder Select this when connecting to a PAY-TV/Canal Plus decoder. S Video Inputs S-video signals. Line3 Output Selects a method of outputting video signals for the LINE 3/DECODER jack. Video Outputs video signals. S Video Outputs S-video signals. Line4 Input Selects a method of inputting video signals for the LINE 4 IN jack on the rear panel of the recorder. Video Inputs video signals. S Video Inputs S-video signals. Audio Settings (Audio) The “Audio” setup allows you to adjust the sound according to the playback and connection conditions. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “SETUP,” and press ENTER. 3 Select “Audio,” and press ENTER. The “Audio” setup appears with the following options. The default settings are underlined. SETUP Settings Audio ATT : Off Video Audio DRC : Standard Audio Downmix : Dolby Surround Features Audio Connection Options Easy Setup Audio ATT (attenuation) If the playback sound is distorted, set this item to “On.” The recorder reduces the audio output level. This function affects the output of the following jacks: – LINE 2 OUT R-AUDIO-L jacks – LINE 1 – TV jack – LINE 3/DECODER jack Settings and Adjustments On Select this when the playback sound from the speakers is distorted. Off Normally select this position. ,continued Audio DRC (Dynamic Range Control) (DVDs only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks: – LINE 2 OUT R-AUDIO-L jacks –LINE 1 – TV jack – LINE 3/DECODER jack – DIGITAL OUT (OPTICAL or COAXIAL) jack only when “Dolby Digital” is set to “D-PC...
Ce manuel est également adapté pour les modèles :Lecteur DVD - RDR-HX910 (1.94 mb)