Évaluations - 7, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
3 Select “AUX AUDIO” Move the selection arrow to “AUX AUDIO”, then press right to select from the following options. • RCA - Analog Audio input • OPTICAL - Digital Audio input . Optical(Digital Audio Input) is available for PCM and Dolby Digital only. MAIN MENU USER SET RETURN ... ENTER USER SET COLOUR SYSTEM :AUTO NICAM :ON IPC :ON AUTO POWER OFF :OFF SHOWVIEW EXTEND :OFF AUX AUDIO :RCA RETURN ... RCA OPTICAL GB 71 GB 70 Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvement over conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but also regular stereo sources into five channels (front left/right, center and surround left/right). In addition, various parameters can be set according to the type of source and contents, so you can adjust the sound field with greater precision. Select the source you want to use. (CD, Video, FM/AM, Input (AV1, AV2, AUX, TV CH)) 1 Press the SOUND MODE button. • Press the SOUND MODE button repeatedly to select Dolby Pro Logic II. 2 Press the SOUND EFFECT button. • Each time you press the button, the sound effect changes as follows. 3 Select the desired mode ("MATRIX, "MOVIE", or "MUSIC"). • Matrix: Use when playing sources recorded in monaural. • Movie: Use this when viewing movies. • Music: Use this mainly for music listening. . Dolby Pro Logic II may not be selected depending on the disc used. (DTS DVD, Dolby Digital 5.1, VCD, MP3) When playing a DVD recorded in 2-channel Dolby Digital, it will automatically be output in Dolby Pro Logic II. Dolby Pro Logic II operates only when CD, VIDEO, FM/AM, or INPUT (AV1, AV2, AUX or TV Broadcast) is selected. Mode, Sound Effect cannot be selected while the DVD signal is being input. Dolby Pro Logic II decoder 1 2 Speaker setup 1 Press the SPEAKER button. • Each time you press the button, the speaker is selected in the order of FL. C . FR . SR . SL . SW . VOL. You will see this on the unit's display. 2 Use the + and - buttons to adjust the volume on the desired speaker. • The volume can be adjusted with in the range of -12 to 0 to +12. 1 Press the TEST button. • Each time you press the button, the test tone will be heard in the order of FL (Front speaker/L) . C (Center speaker) . FR (Front speaker/R) .SR (Surround speaker/R) . SL (Surround speaker/L) . SW (Subwoofer). 2 To stop the test tone, press the TEST button again. . You can adjust the speaker balance for the selected channel using the Volume Control buttons during the test tone operation. To adjust the speaker balance To test the speakers 1 1 2 2 GB 73 GB 72 Example: Storing an FM station of 89.1 MHz into the preset number 02 of the FM1 band 1 Press the FM/AM button to select the FM band. • Each time you press the button, the band alternates between FM and AM. 2 Select a channel to choose the memory address to which you want to store the station. 3 Use the .. and ..buttons to tune in to 89.1 FM. 4 Press the button or the ENTER button on the remote control. • 89.1 FM is stored in FM1. 5 Select a channel to select a preset station number. 6 Press the STOP button or ENTER button again to store FM station 89.1 to FM 1. 7 To store other stations Repeat steps 1 to 6 above. • You can use the CHANNEL button to store up to 20 FM stations and 10 AM stations. . • will be indicated when tuned to an FM station. • To store other channels, repeat the steps 2 to 4 above. You can automatically or manually tune in to FM and AM stations to listen to radio broadcasts. 1 Press the FM/AM button. • Each time you press the button, the band alternates between FM and AM. 2 Tune in to a station. • Automatic tuning : Hold down l.. / ..l to begin the automatic tuning. • Manual tuning : Press l.. to tune in to a lower frequency, or press ..l to tune in to a higher frequency. . The FM/AM function cannot be selected while operating the DVD player or VCR. Listening to radio broadcasts Presetting stations 1 2 2 1 2 3 3 4 SOUND mode/effect function This feature simulates the sound of different acoustic spaces. 1 Press the SOUND MODE button. • Each time you press the button, the sound mode changes as follows. • The SOUND mode adds a coustic surround effect during playback of stereo analog or linear PCM digital signals. 2 Press the SOUND EFFECT button. • Each time you press the button, the selection alternates between EFFECT 1 and EFFECT 2. • The higher the number, the greater the effect. • If you press the button while in the STEREO mode, the selection alternates between STEREO snd 4 Stereo. 1 2 PL II NATURAL JAZZ CONCERT STADIUM Dolby Pro Logic II : 5.1ch ON : STEREO Mode PL II STEREO NATURAL JAZZ CONCERT STADIUM Video Tape TV, FM/AM AUX OPTICAL (PCM) Source OFF . The Sound mode and effects do not Work With Dolby Digital, DTS, VCD, MP3, LPCM disc, and Optical Input(OPTICAL) sources. Dolby Digital, DTS, Optical Input (Dolby Digital) : 5.1-Channel speaker output VCD, MP3, LPCM, Optical Input (PCM...