Évaluations - 4, GPA: 4.3 ( )

Fabricant : Toshiba Taille : 950.53 kb Nom Fichier : Langue d'enseignement:

Playback stops after playing the last programmed track/file on the program list. Note The programmed tracks/files are cleared when the power is turned off or the disc is removed. 1-39 Programmed Playback (Continued) Repeat Programmed Tracks/All/Off CD MP3 WMA 1 To repeat the track currently playing, press REPEAT. The Repeat Track icon appears on the menu screen. 2 To repeat all tracks on the program list, press REPEAT two times. The Repeat All icon appears on the menu screen. 3 To cancel Repeat mode, press REPEAT repeatedly until the Repeat Off icon appears on the menu screen. Note If you press SKIP (.) twice or SKIP (>) during Repeat Track playback, the repeat playback cancels. Repeat Programmed All/Off JPEG 1 To repeat all files on the program list, press REPEAT when JPEG menu appears. The Repeat All icon appears on the menu screen. 2 Press PLAY or ENTER to start repeat playback. 3 To cancel Repeat mode, first press STOP to stop playback then press REPEAT when JPEG menu appears. Note E The REPEAT button is not available when the mark appear. Press PROGRAM to clear the E mark. Erasing a Track/File from Program List 1 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode. The E mark will appear. Note JPEG can be programmed only in stop mode (when menu screen is displayed.) 2 Press B to move to the Program list. 3 Use v/V to select the track/file that you wish to erase from the Program list. 4 Press CLEAR. The track/file will be erased from the Program list. Erasing the Complete Program List 1 Follow steps 1-2 of “Erasing a Track/File from Program List” as above. 2 Use v/V to select “Clear All”, then press ENTER. The complete Program for the disc will be erased. The programs are also cleared when the disc is removed. 1-40 Additional Information - DVD Part One Touch Replay Press INSTANT REPLAY during playback and the disc will reverse picture search through 10 seconds of playback. And then the playback will start from the point again. Screen Saver A screen saver image appears when you leave the DVD Player in stop mode for about five minutes. Video Mode Setting VCD1.1VCD2.0DVD • With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode. • To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. • Video mode sequence: Video1 > Video2 > Film > Adapt > Auto. • If you turn off the power, the video mode will return to initial default state (Auto). Detailed Description of each Video Mode Auto : The source material of the DVD video (film material or video material) is determined from disc information. Video1 : Suitable for playing video based content with comparatively little motion. Video2 : Suitable for playing video based content with comparatively more motion. Film : Suitable for playing film based content or video based material recorded by the progressive scan method. Adapt : Determines the appropriate mode (film or video) during disc playback, and automatically selects the proper mode. Suitable for playing a disc comprised of film and video based content. OPERATION 1-41 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD+VCR does not work. • No disc is inserted. • No tape is inserted. • Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) No picture. • The TV is not set to receive DVD+VCR signal output. • Select the appropriate video input mode on the TV so the picture from the DVD+VCR appears on the TV screen. • TV/VCR mode for DVD+VCR is set to TV. • Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears in the display window. • The video cable is not connected securely. • Connect the video cable securely. • The connected TV power is turned off. • Turn on the TV. No sound. • The equipment connected with the audio cable is not set to receive DVD+VCR signal output. • Select the correct input mode of the audio receiver so you can listen to the sound from the DVD+VCR. • The audio cables are not connected securely. • Connect the audio cable securely. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. • The Digital Audio Output is set to the wrong position. • Set the Digital Audio Output to the correct position, then turn on the DVD+VCR again by pressing POWER. The playback picture is poor. • The disc is dirty. ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :