Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
¶ In a cabinet, allow about 2.5 cm (1 inch) of free space all around the player for adequate ventilation. ¶ If the DVD Video player cannot read CDs/DVDs correctly, use a commonly available cleaning CD/DVD to clean the lens before taking the DVD Video player to be repaired. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens. ¶ The lens may cloud over when the DVD Video player is suddenly moved from cold to warm surroundings. Playing a CD/DVD is not possible then. Leave the power on for about one hour with no disc in the unit until normal playback is possible. Cleaning Discs ¶ When a disc becomes dir ty, clean it with a cleaning cloth. Wipe the disc from the centre out, in a straight line. ¶ Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for analog discs. INTRODUCTION Functional Overview Front and Rear Panels English PLAY PREV STOP NEXT SOUND OPEN / CLOSE PAUSE DVD/VIDEO CD/CD PLAYER by STANDBY-ON – switches the player to Standby mode or ON DISPLAY – shows the current status of the player T NEXT – goes to next chapter or track B PLAY – star ts playback SOUND – selects Stereo, Dolby Surround or 3D Sound (TruSurround) / OPEN/CLOSE – opens/closes the disc tray Disc Tray ; PAUSE – interrupts playback S PREV – goes to previous chapter or track 9 STOP – stops playback COAXIAL DIGITAL AUDIO OUT PCM-MPEG2-Dolby Digital-DTS TV OUT LR (CVBS) VIDEO OUTAUDIO OUT S-VIDEO OUT (Y/C) SUBW.OPT OUT MAINS (AC Power) – connect to power source COAXIAL (Digital audio out) – connect to digital (coaxial) audio equipment OPT OUT (Digital audio out) – connect to digital (optical) audio equipment SUBW. (Subwoofer) – connect to an active subwoofer S-VIDEO OUT (Y/C) – connect to a TV with S-Video (Y/C) inputs TV OUT VIDEO OUT – connect to a TV with SCART (CVBS) VIDEO OUT – connect to a TVwith CVBS video inputs AUDIO OUT (Left/Right) – connect to an amplifier, receiver or stereo system Caution: Do not touch the inner pins of the jacks on the rear panel connectors. Electrostatic discharge may cause permanent damage to the unit. FUNCTIONAL OVERVIEW English Remote Control RETURN / RESUME – go back to previous menu / to continue playback after play was stopped DISC MENU – access menu of a DVD disc 1 2 3 4 – (left/right/up/down) select an item in the menu OK – acknowledge menu selection S – search backward* / go to a previous chapter or track STOP ( 9 ) – stops playback PLAY ( B ) – star ts playback PAUSE ( ; ) – pause playback temporarily / frame-by-frame playback REPEAT – repeat chapter, track, title, disc REPEAT (A-B) – repeat a specific segment SHUFFLE – play tracks in random order SCAN – play the first 10 seconds of each track/chapter within a disc POWER B – switches DVD ON or to standby-on mode 0-9 numerical key pad – select numbered items in a menu DISPLAY – display bit rate indicator during playback SYSTEM MENU – access or remove player’s system menu T – search forward* / next chapter or track SUBTITLE – subtitle language selector ANGLE – select DVD camera angle ZOOM – enlarge video image AUDIO – audio language selector * Press key for about 2 seconds FUNCTIONAL OVERVIEW Preparation English General Notes ¶ Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. ¶ Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessar y to make the best connections. ¶ For better sound reproduction, connect the player’s audio out jacks to the audio in jacks of your amplifier, receiver, stereo or A/V equipment. See ‘Connecting to Optional Equipment’. Caution: – Make sure the DVD player is connected directly to the TV. Set the TV to the correct video input channel. – Do not connect the player’s audio out jack to the phono in jack of your audio system. – Do not connect your DVD-player via your VCR. The DVD image could be distorted by the copy protection system. Connecting to a TV ¶ Make one of the following connections, depending on the capabilities of your existing equipment. 1 Connect the SCART to the corresponding connector on the TV using the SCART cable supplied (Z). If your TV is not equipped with a SC ART you can select one of the following alterative connections: S-Video (Y/C) connection 1 2 Connect the Y/C S-VIDEO OUT jack on the DVD player to the S-Video in jack on the TV using an optional S-Video cable (Y). Connect the Left and Right AUDIO OUT jacks of the DVD player to the audio left/right in jacks on the TV (A). CVBS connection 1 2 Connect the (CVBS) VIDEO OUT jack on the DVD player to the video in jack on the TV using the video cable supplied (X). Connect the Left and Right AUDIO OUT jacks of the DVD player to the audio left/right in jacks on the TV (A). TV Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround 1 Connect the Left and ...