Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Digital Output Set the Digital output according to your optional audio equipment connection. . Off:Turn off the digital output. . All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver. . PCM Only: Only if your receiver is not capable of decoding multi-channel audio. Helpful Hints: – If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality. . 48kHz: Playback a disc recorded at the sampling rate of 48kHz. . 96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic (Flat) mode. Helpful Hint: – LPCM Output can be selected only when PCM Only is activated. 28 TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 01-41 DVP5505S_EU_02A 28 02(A)_8239 300 3435120/01/2005, 5:16 PM DVD Setup Menu Options Sound Mode CD Upsampling The options included in Sound Mode Setup are: ‘3D’, ‘Movie Mode’ and ‘Music Mode’. 1 In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {SOUND MODE}, then press 2. 2 Press the 3 4 keys to highlight an option. 3 Enter its submenu by pressing 2. 4 Press 3 4 to select a setting, then press OK to confirm your selection. 3D This function provides a virtual surround sound experience using just two speakers. . Off, Living Room, Hall, Arena and Church Movie Mode Select a Sound Mode that matches the type of music you are playing.These preset Sound Modes adjust the frequency bands of the video to enhance your favourite movie sound track. . Off, Sci-Fic, Action, Drama and Concert Music Mode Select a Sound Mode that matches the type of music you are playing.These preset Sound Modes adjust the frequency bands of the audio to enhance your favourite music. . Off, Digital, Rock, Classic and Jazz Speaker Setup This menu contains setup options for your audio output which makes the speaker setup system reproduce high quality surround sound. For details, see page 36-37. This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the upsampling, the player will automatically switch to stereo mode. 1 In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {CD UPSAMPLING}, then press 2. OFF Select this to disable CD-upsampling. 88.2 kHz (X2) Select this to convert the sampling rate of the CDs twice higher than the original. 176.4 kHz (X4) Select this to convert the sampling rate of the CDs four times higher than the original. 2 Press 3 4 to select a setting, then press OK to confirm your selection. Helpful Hint: – CD upsampling feature is only applicable to stereo output setting. Night Mode - turning on/off In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night. 1 In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {NIGHT MODE}, then press 2. ON Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. OFF Select this when you want to enjoy the surround sound with its full dynamic range. 2 Press 3 4 to select a setting, then press OK to confirm your selection. English TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 29 01-41 DVP5505S_EU_02A 29 02(A)_8239 300 3435120/01/2005, 5:16 PM DVD Setup Menu Options English Video Setup Menu 1 In disc mode, press SYSTEM MENU. 2 Press 1 2 to select ‘Video Setup’ icon. 3 Press OK to confirm. Go To Video Setup Page TV Type TV Display Progressive Picture Setting Component - -Video Setup Page - - TV Type This menu contains the options for selecting the colour system that matches the connected TV. For details, see page 17. Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback. 1 In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {TV DISPLAY}, then press 2. 2 Press 3 4 to highlight one of the options below: 4:3 PAN SCAN – Select this if you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. 4:3 LETTER BOX – Select this if you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. 16:9 – Select this if you have a wide- screen TV. 3 Select an item and press OK. 30 TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 01-41 DVP5505S_EU_02A 30 02(A)_8239 300 3435120/01/2005, 5:16 PM DVD Setup Menu Options Progressive - turning on/off Picture S...