Évaluations - 3, GPA: 4.3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Listening to a section of a track repeatedly (A-B Repeat) You can listen to a specific section within a track repeatedly by selecting the starting point A, and ending point B. Make sure that points A and B are within the same track. 1 While playing a track that contains the section you want to repeat, enter the menu and select “SubPMode” “ A-BRepeat”. “A-” flashes in the display. 2 Press NENT at the starting point (A). Point A is entered and “B” flashes in the display. 3 Press NENT at the ending point (B). Point B is entered, “A-B” and “ ” lights up, and the section between point A and B starts playing repeatedly. z You can reset points A and B by pressing the 5way control key towards > during A-B Repeat play. Note If the recorder comes to the end of the last track on the disc while you are selecting point A, the setting is canceled. 1) “A-BRepeat ” does not appear when the “Menu Mode” is set to “Simple”. Searching for a track (Search) You can easily search for a track by track name, group name, artist name, or album name. Artist names and album names can be viewed in the case of discs used in Hi- MD mode only. Jog dial NAVI/ MENU 5-way control key x (NENT) 1 Enter the menu and select “Useful” “ Search”. 2 Turn the jog dial to select the item you want to use for searching, and then press NENT to enter. Display To by Track search by track name by Group search by group name by Artist1) search by artist name by Album1) search by album name 1) Appears only for discs used in Hi-MD mode. 3 If you select “by Track” in step 2, skip this step. If you select an item other than “by Track” in step 2, turn the jog dial to select the desired group, artist, or album, and then press NENT to enter. A list of tracks for the selected group, artist, or album appears in the display. 4 Turn the jog dial to select the desired track, and then press NENT to enter the selection. The selected track starts playing. Notes • After step 4, Main play mode and Sub play mode will be canceled (Repeat play will function). • During a search, unlabeled tracks will appear at the end of each list. • While the recorder is sorting the selected items, “SORTING” appears in the display. Wait until this indication disappears from the display before doing any operation. Selecting the sound quality (6-Band Equalizer) 6-BAND EQUALIZER provides 6 different sound qualities. You can vary the virtual sound to create different acoustics, or modify the sound to suit your taste and store it for later use. Jog dial NAVI/ MENU 5-way control key (NENT, ., >) 1 While playing, enter the menu and select “Sound” - “Sound EQ”. 2 Turn the jog dial repeatedly to select the sound mode and then press NENT to enter the selection. A Level of the each frequency (100 Hz - 10 kHz) B Each time you turn the jog dial, A changes as follows. When you press NENT, B appears. A B Heavy SH Pops SP Jazz SJ Unique SU Custom1 S1 Custom2 S2 To modify and store the sound You can modify the sound and store the results in “Custom1” and “Custom2”. 1 While playing, enter the menu and select “Sound” -“Sound EQ” “ Custom1” or “Custom2”. 2 Press the 5-way control key towards . or > to select the frequency. Frequency (100 Hz) From the left, you can select 100 Hz, 250 Hz, 630 Hz, 1.6 kHz, 4 kHz, 10 kHz 3 Turn the jog dial to adjust the level. Level (+10 dB) You can select from among seven levels. –10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB, +10 dB 4 After selecting the level, press NENT to enter the selection. To cancel the setting Select “Normal” in step 1. Note 6-Band Equalizer will not function during recording. Editing recorded tracks Before editing You can edit your recordings by adding/ erasing track marks or labeling tracks and discs. Notes • When you edit the contents of a 1GB Hi-MD disc, connect the AC power adaptor to the recorder, charge the rechargeable battery fully (battery level indication shows ), or use a new alkaline dry battery (battery level indication shows ). When you attempt to edit on a 1GB Hi-MD disc, “NotENOUGH POWER TO EDIT” may appear and editing cannot be done even if the battery level indication shows sufficient remaining power while the recorder is stopped or playing. This is because of a mechanism that disables editing when the remaining battery power is estimated by the recorder to be insufficient due to the high power consumption required for 1GB Hi-MD disc editing. • Premastered discs cannot be edited. • Close the record-protect tab on the side of the disc before editing. • Do not move or jog the recorder or disconnect the power source while editing or “SYSTEM FILE WRITING” is flashing in the display. If you do, the data edited up to that point may not be recorded to the disc, or data on the disc may be damaged. “SYSTEM FILE WRITING” flashes while the editing results are being recorded. • While “SYSTEM FILE WRITING” is flashing, the lid becomes locked. Adding titles (Title) You can add titles to tracks, groups and discs. You can add artist names and album names to track...