Évaluations - , GPA:
(
)
)
Fabricant : LG
Taille : 717.49 kb
Nom Fichier :
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
DRV Moves to a next USB drive. d d/MPlays or pauses playback. e SHF Randoms playback f MUTE Temporarily stops the sound. g VOLUME W/S Adjusts volume level. h c/v Skip/ Search/ Seek/ Tune Returns to the previous step. w/s • List up/ down • Adjusts settings. • Moves 10 MP3/WMA tracks backward or forward if there is no folder or one folder on a CD. • Moves to the previous or next folder if there are more than 2 folders on a CD. ENTER/ LIST • Confirms the settings. • Checks tracks, files or preset stations. Repeats playback k INT Intro scan l Numeric buttons (1 - 6) Selects a numbered preset station in TUNER. Battery Installation 1. Pull out the battery holder with a sharp product like a ball point pen. 2. Put the battery with and correctly on the battery holder. 3. Push the battery holder back into its original position. Note Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. , , 8 Connecting Detaching the control panel About detachable 1. Press the 6 to open the control panel. control panel Connecting 2 [LCS510IR/ LCS510UR] Attaching the control panel 1. Align the left side of the panel with the stopper. 2. Push the control panel to right. 3. Pull the control panel out of the unit. 4. Put the detached control panel into the 2. Push the right side of panel into the unit until it protective case. clicks. >Caution • The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. • Do not leave the control panel in any area exposed to high temperatures or direct Control panel sunlight. Protective Case • Do not drop the control panel or otherwise Note subject it to strong impact. • Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. Connecting 9 About detachable Detaching the control panel 1. Press the OPEN to open the control panel. control panel [LCF610IR] Attaching the control panel 1. Attach part A of the control panel to part B 2. Push the control panel to left. of the unit. 2 Connecting .... C 3. Pull the control panel out of the unit. 2. Attach part of the control panel to part D 4. Put the detached control panel into the of the unit while pushing the control panel to protective case. left. 3. Close the control panel. Control panel Protective Case .... .The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. .Do not leave the control panel in any area exposed to high temperatures or direct sunlight. .Do not drop the control panel or otherwise subject it to strong impact. .Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. >Caution Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. , Note 10 Connecting ISO-DIN Installation Installation 2 Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Connecting Bend the claws according to the thickness of the dashboard. Control panel 1. Remove the existing receiver unit. 2. Make the necessary connections. 3. Install the installation sleeve. 4. Install the unit into the installation sleeve. Removing the existing receiver unit If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. 1. Remove the rear support from the unit. 2. Remove the control panel and trim ring from the unit. 3. Insert the lever into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. Control panel 1. Slide the unit into the ISO-DIN frame. 2. Fit screws removed from the old unit. 3. Slide the unit and frame into the dash opening. 4. Install the dash panel or adapter plate. (According to models, this step may not be needed.) 5. Install the trim ring to the unit. 6. Install the control panel to the unit. Connecting 11 Connection Connecting to a car Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 2 Connecting abcd efgh abcd efgh a b c d e f g h AAAAAAAAA a Gray: Front Right + A b Gray/ Black Stripe: Front Right - A cViolet: Rear Right + A dViolet/ Black Stripe: Rear Right - A eWhite: Front Left + A fWhite/ Black Stripe: Front Left - A g Green: Rear Left + A h Green/ Black Stripe: Rear Left - Power Antenna Control Relay To Audio out To Audio in Amplifi er Rear Left (Sub-woofer Left) Front Left Rear Right (Sub-woofer Right) Front Right Amplifi er B f Power Antenna (Blue) B g Dimmer (Pink) B cTo Ignition...