Évaluations - , GPA:
(
)
)
Fabricant : Yamaha
Taille : 1.28 mb
Nom Fichier : a3756bb2-b114-4367-84d0-bacefeafe280.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
1 Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel). 2 With the Recorder on, press TIMER on the remote control. The programming method selected last is marked. 3 Select line “VCR Plus+ system” using w or v and confirm with u. 4 Enter the entire PlusCode number.This number is up to 9 digits long and can be found next to the start time of the TV program in your TV listings magazine. e.g.: 5-234-89 or 5 234 89 Enter 523489 for the PlusCode number. If you make a mistake, you can clear the entry with CLEAR. Timer Mo-Fr/Weekly Press SELECT To store Press OK VCR Plus+system PlusCode number - - - - - - - - - Tip Selecting daily/weekly recordings Using SELECT, select from the following options: “Mo-Fr”: Repeated daily recordings (Monday to Friday). “Weekly”: Repeated weekly recordings (every week on the same day). 5 Confirm with ENTER/OK. Problem . The following message appears on the screen:“Please enter channel number” . The channel number of the TV channel has not yet been assigned to the Plus- Code number. Using u, t or the number buttons 0..9 on the remote control, select the corresponding channel number (name) of the TV channel and confirm with ENTER/OK. . The following message appears on the screen:“PlusCode number wrong” . The entered PlusCode number is incorrect. Repeat your entry or cancel using the SYSTEM-MENU button. . Check the time/date (see “Setting the time & date” in “Installing your DVD recorder”). . The following message appears on the screen:“Date does not match Mon-Fri” . A daily recording was entered for the wrong day. Daily programming can only be used for recordings to be made from Monday to Friday. Timer To store Press OK VCR Plus+system Rec Date Ch. Start End Mode 01/22 001 08:30AM 10:00PM M1 6 The decoded data appears after confirmation.You can go back and change the data. Select the appropriate input field with u or t. If required, make changes using w, v or the number buttons 0..9. Programming a recording (TIMER) 54 Tip Change “AM/PM” Use the SELECT button to select “AM” or “PM” in the input fields “Start” and “End”. Changing the recording mode Select “RecMode” using u. Using w, select the recording mode “M1, M2, M2x, M3, M4, M6, FR”. 7 If all information is correct, press the ENTER/OK button. The programming information is stored in a TIMER block. 8 To end, press TIMER. 9 Insert a recordable disc (one without write protection). The disc you have inserted will be checked. 0 Switch the DVD recorder off with B/I. The programmed recording will only function properly if the DVD recorder has been switched off using the B/I button. If any of the TIMER blocks are in use,“TIMER” will light up on the recorder display. Programming recordings without the VCR Plus+® System Timer Mo-Fr/Weekly Press SELECT To store Press OK Timer programming Rec Date Ch. Start End Mode 01/22 01 08:30AM 10:00PM M1 1 Switch on the TV set. If required, select the programme number for the DVD recorder. 2 Press TIMER on the remote control. The programming method selected last is marked. 3 Select line “Timer programming” with w or v. and confirm with the u button. The information will appear on the screen. 4 Select the input field with t or u. 5 Enter information with w or v or with the number buttons 0..9. Tip Selecting daily/weekly recordings In “Date” use SELECT to select from the following options: “Mo-Fr”: Repeated daily recordings from Monday to Friday “Mo”: Repeated weekly recordings (every week on the same day, e.g. Monday). Program numbers of the “EXT1” and “EXT2” cinch jack You can also program recordings from external sources via S-VIDEO IN,Video in (“EXT1”) or IN COMPONENT VIDEO (“EXT2”). Change “AM/PM” Use the SELECT button to select “AM” or “PM” in the input fields “Start” and “End”. Changing the recording quality Select the “RecMode” input field using u. Use w, v to select the recording mode. 6 If all information is correct, press the ENTER/OK button. The programming information is stored in a TIMER block. 7 To end, press TIMER. 8 Insert a DVD (one without write protection). The disc you have inserted will be checked. Programming a recording (TIMER) English English 9 Switch off with B/I. The programmed recording will only function properly if the DVD recorder has been switched off using the B/I button. If any of the TIMER blocks are in use,“TIMER” will light up on the recorder display. How to change or delete a programmed recording (TIMER) Timer To change Press > To exit Press TIMER Timer List Total record time: 01:40 Rec Date Ch. Start End Mode 01/22 01 04:25PM 06:05PM M2 --/---------:----:----- 1 Switch on the TV set. If required, select the programme number for the DVD recorder (channel 3 or 4). 2 Press TIMER on the remote control. The programming mode selected last is marked. 3 Select “Timer List” using w or v and confirm with u. 4 Select the programmed recording (TIMER) you want to check, change or delete with w or v. Tip Delete programmed rec...