![](/images/star.gif)
![](/images/star.gif)
![](/images/star.gif)
![](/images/star.gif)
![](/images/poluempty_star.gif)
|
Facilité d'utilisation
Note: The Remote Control of a JVC TV or Receiver will not operate the unit. Remote Control 9 Introduction0-9 Selects numbered options in a menu. bBvV Selects menu options. Fast forwards picture search through 30 seconds of recording. AUX Selects the VCR deck’s source (Tuner, LINE 1, or LINE 2). A.MONITOR Selects an audio language (DVD) or an audio channel (VCD). ANGLE Selects a DVD camera angle, if available. CH -/+ Selects VCR channels. Adjusts manually the tape’s picture on the TV screen. CLEAR (0000) Removes a mark on the Marker Search menu. DISC MENU Accesses menu on a DVD disc. DISPLAY Accesses On-Screen Display. Switches between the clock, tape counter and tape remaining modes on the display. DVD Select the DVD+VCR function mode to DVD. EJECT (Z) Ejects the tape in the VCR deck. ENTER/OK Confirms menu selections. Displays functions on the TV screen. MARKER Marks any point during playback. OPEN/CLOSE (Z) Opens and closes the disc tray. PAUSE (X) Pause playback or recording. Press repeatedly for frame-by-frame playback. PLAY (N) Starts playback. POWER (1/:) Switches DVD+VCR ON and OFF. PROGRAM Shows or hides the menu for Program playback of Audio CD. RANDOM Plays tracks in random order. REC (z) Starts recording. Press repeatedly to set the recording time. REPEAT Repeats chapter, track, title or all. REPEAT A-B Repeats sequence between two points (A and B). RETURN (O) Removes the setup menu. REW (m)/FF (M) - DVD: Search backward or forward. - VCR: Rewinds/Advances the tape during the STOP mode, for fast backward/forward picture search. SEARCH Displays Marker Search menu. SETUP MENU Accesses or removes DVD Setup menu and VCR menu. SKIP (./ >) Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. SPEED Selects recording speed. STOP (x) Stops playback or recording. SUBTITLE Selects a subtitle language. TITLE Displays the disc’s Title menu, if available. TV/VCR To view channels selected by the VCR tuner or by the TV tuner. VCR Select the DVD+VCR function mode to VCR. ZOOM Enlarges DVD video image. Note: The Remote Control of a JVC TV or Receiver will not operate the unit. Remote Control Rear Panel ghabcdef a ANT.IN Connect the VHF/UHF/CATV antenna to this terminal. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). c DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. d COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT) Connect to a TV with Y Pb Pr inputs. Preparation e AUDIO OUT (Left/Right) (DVD OUT) Connect to a TV or other equipment with audio inputs. f AC Power Cord Plug into the power source. g RF. OUT Connect to a TV with RF coaxial inputs. h COAXIAL (DIGITAL AUDIO OUT jack) (DVD OUT) Connect to digital (coaxial) audio equipment. Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, VCR, stereo system or other devices as necessary for additional connection information. Notes: • The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off the unit after removing the disc. • Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel. • Do not connect the DVD+VCR’s AUDIO OUT jack to the phone in jack (record deck) of your audio system. Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system. 10 11 Preparation Connecting anConnecting an AntennaAntenna or Cable TVor Cable TV aAntenna: Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your anten- na cable is flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adap- tor over the ANT.IN jack. Don’t attempt to screw it into to the DVD+VCR. bCable TV: If your cable connection has no converter or descrambler, unscrew the cable from your TV and attach it to the ANT.IN jack on the DVD+VCR. If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter, and a coaxial cable from the OUT connector on the converter to the ANT IN on your DVD+VCR. This cable hookup permits both TV and DVD+VCR operation. To view or record a CATV channel when using cable box 1. Tune the TV to the DVD+VCR output channel (CH 3 or 4). 2. Set the DVD+VCR channel selector to the cable output channel. (Example: CH3) 3. Select a channel using the cable converter. Notes: • With this connection, you cannot record one pro- gram while viewing another. • If you are using a cable box to tune channels, it is not necessary to do Auto Channel Set. Basic TV ConnectionsBasic TV Connections Make one of the following connections, depending on the capabilities of your TV. Re...
Ce manuel est également adapté pour les modèles :Lecteur DVD - HR-XVC19SUS (1.82 mb)