Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
Thread the pushplate screws into the mounting box leaving a majority of the screw exposed. Attach the pushplate to the mounting screws, then use the hex key provided to fully tighten the screws. Refer to the appropriate Pushplate User’s Guide for detailed installation and setup instructions. 75.0131.05 20080606 Page 3 of 4 5 Installation (Continued) 6 Attach Transmitter TRANSMITTER MOUNTING TRAY NOTE: PANTHER PUSHPLATES DO NOT REQUIRE A TRANSMITTER. ATTACH TO PUSHPLATE ATTACH TRANSMITTER HERE CAUTION: IF THE TRANSMITTER IS ALLOWED TO HANG DOWN INSIDE THE BOLLARD, ERRATIC OPERATION MAY OCCUR. 1. If using the transmitter for this application, attach transmitter to mounting tray with velcro pad included in the package. Hardwired systems donot require this step. 2. Attach plastic cap to top of the post with three cap mounting screws. Tighten screws with hex key included in the pushplate package. Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please call BEA, Inc. If you must wait for the following workday to call BEA, leave the door inoperable until satisfactory repairs can be made. Never sacrifice the safe operation of the automatic door or gate for an incomplete solution. The following numbers can be called 24 hours a day, 7 days a week. For more information visit 6 Company Contact West: 1-888-419-2564 Mid-West: 1-888-308-8843 South-East: 1-800-407-4545 North-East: 1-866-836-1863 US and Canada: 1-866-249-7937 Canada: 1-866-836-1863 Page 4 of 4 75.0131.05 20080606 ...
Ce manuel est également adapté pour les modèles :Portes et fenêtres - Bollards 10EMSQ475X (231.94 kb)
Portes et fenêtres - Bollards 10PBR45X (231.94 kb)
Portes et fenêtres - Bollards 10PBS45X (231.94 kb)