|
Instructions Panasonic, Modèle KXFMC230D
Fabricant : Panasonic Taille : 3.42 mb Nom Fichier : KXFMC230.PDF
Langue d'enseignement:
|
|
|
|
Aller à la télécharger
Facilité d'utilisation
The display indicates the approximate amount of remaining film. FILM E ■ ■ ■ F ♦ FILM E - F When the film indicator points to this position, the remaining film will print up to 25 pages of letter size documents. Prepare a new film or film cartridge for replacement. Replacing the film or film cartridge When the unit detects the end of the film, one of the following messages will be displayed. FILM NEAR EMPTY FILM EMPTY The remaining film prints approx. 15 letter size documents. Prepare a new film or film cartridge. The film is empty. Install a new film or film cartridge. To order replacement parts, see page 7. 1 2 Slide the front cover open lever forward to unlock the front cover and lift to open. Remove the film cartridge. • If you have purchased a film cartridge (Model no. KX-FA135) for replacement, skip to step 9. •To replace only the film, go to step 3. Unlock the four gears by ((a)) pulling the top side gears (blue and green gears) forward and ((§)) pushing back the bottom side gears (green gears). Remove the used film. Remove the four gears from the used film cores. Caution: •The film is not reusable. You can order a new film for replacement through your nearest Panasonic dealer or call 1-800-332-5368. Film cartridge Front cover open lever Blue gear Top side gears Green 9ear Green gearV^ Bottom side gears Green gear 110 For Assistance, Call 1 -800-435-7329 Ink Film 8 9 10 Insert the blue gear into the blue core of the new film. Insert the three green gears into the remaining cores of the new film. Insert the film into the cartridge so that the blue gear matches the blue label on the cartridge. Lock the four gears of the film by (®) pushing back the top side gears and ((b)) pulling the bottom side gears forward until they lock into place. • If the film is slack, tighten it by winding the bottom side gears. Incorrect Correct ©0 tight Insert the film cartridge by matching the blue label on the cartridge with that on the unit. Close the front cover securely by pushing down on both ends. •The unit will check if the film is installed correctly. The following message will be displayed. Display: PLEASE WAIT • If the following message is displayed, the film is not inserted correctly in the cartridge. CHECK FILM Reinsert it correctly. For Assistance, Call 1-800-435-7329 111 Battery Optional spare battery When the handset battery needs charging, replace it with a fully charged optional spare battery. This prevents having to wait for the handset battery to recharge. Please purchase a Panasonic P-P592 (KX-A92) battery and install it in the main unit to charge. To order, call toll free 1-800-332-5368. Installing the spare battery in the main unit 1 Open the battery cover on the main unit by pushing the tab and lifting the cover. 2 Insert the spare battery in the main unit observing the proper polarity, then close the battery cover on the main unit. •The SPARE CHARGE indicator lights. Note: •The spare battery is always being charged in the main unit while the power cord is connected. The battery cannot be overcharged. Attention: The product you have purchased is powered by a nickel cadmium battery which is recyclable. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY for information on how to recycle this battery. R BR С Ni-Cd 112 For Assistance, Call 1 -800-435-7329 Battery Replacing the handset battery with the spare battery To prevent memory loss, replace the battery within 5 minutes. 1 Press the marked portion to unlock and slide the battery cover to remove it. Remove the battery. (a) Remove the spare battery from the main unit. (b) Insert the handset battery in the main unit observing the proper polarity. Insert the spare battery in the handset observing the proper polarity. When finished, replace the battery cover on the cordless handset. Note: • If the TALK/BATT LOW indicator flashes slowly even when the handset battery has been fully charged, it is time to replace the battery with a new one. Remember to fully charge the new battery after battery replacement. • Please use only a Panasonic P-P592 (KX-A92) battery. To order, call toll free 1-800-332-5368. • Do not touch the bottom of the cradle because it may be hot. 113 For Assistance, Call 1-800-435-7329 Cleaning Cleaning the document feeder If misfeeding occurs frequently or dirty patterns or black bands appear on a copied or transmitted document, clean the document feeder rollers, sub roller, rubber flap, white plate and glass. 1 2 3 4 5 6 Disconnect the power cord and the telephone line cord. Slide the lever forward to unlock the front cover and lift to open. Clean the document feeder rollers, sub roller and rubber flap with a cloth moistened with isopropyl rubbing alcohol, and let all parts dry thoroughly. Clean the white plate and glass...
Écrivez votre propre critique du dispositif
|
|