Évaluations - 5, GPA: 4
(
)
)
|
Facilité d'utilisation
(See page 99 and 108) 2 Multi-LOGO 3 Dept. Code 82 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick Memory Transmission. (See page 47 to 50) Invalid : Stores all documents into memory first before *2 Valid dialing the telephone number. Valid : Starts dialing the telephone number immediately after storing the first page. 88 LINE SELECTION [See Note 3] *1 Auto Setting the home position of the Telephone Line selection. Auto : Selects the available telephone line for transmission automatically. Linel :Selects this as the default telephone line, unless 2 Line 1 3 Line 2 manually selecting an alternate phone line. Line2:Selects this as the default telephone line, unless manually selecting an alternate phone line. 99 MEMORY SIZE (Flash Memory) Displays the amount of base and optional memory installed. (Base Memory + Optional Memory) NOTE) !■ Setting number marked with an asterisk (*) indicates the factory standard setting. -' 2. This parameter supports an optional telephone service "Distinctive Ring Service" provided by your local telephone company. It allows up to 4 different telephone numbers to be assigned on a single telephone line with a distinctive ring for each telephone number. By selecting the appropriate ring pattern associated with the telephone number assigned for your fax machine. It can differentiate and answer the incoming call on the fax number. All other calls on the other telephone numbers will not be answered. This optional service from your local phone company is also called Custom Ringing, Distinctive Ringing, Ident-a-call, Ident-a-ring, Personalized Ringing, RingMaster, RingMate, Selective Ringing, Smart Ring or something similar Check with your local telephone company on the availability of this service in your area. 3. This parameter is available only when the G3 Communication Port Option is installed. 39 Programming Your Machine In general, your machine will send any document printed on A4, Letter or Legal size paper. Document Size Document Thickness Maximum Size Direction Minimum Size 5.8 in (148 mm^ 5.0 in (128 mm) Direction Single sheet: 0.0024 in (0.06 mm), to 0.0060 in (0.15 mm) Multiple sheets: 0.0024 in (0.06 mm), to 0.0039 in (0.10mm) ¥®qo ©aiMioß ©@oïx°] You must never try to send documents that are: ¿7 Wet 3 Too thin (e.g., onionskin, airmail paper, pages from some magazines, etc.) & Coated (e.g., glossy paper, etc.) /p- 7 4/ sir Covered with wet ink or paste Wrinkled, curled or folded Chemically processed (e.g., pressure-sensitive paper, carbon-coated paper, etc.) or made of cloth or metal To transmit these kinds of documents, make a photocopy first and then transmit the copy instead. Loadina Documente Q=(®gxol ®(5x§s3DGrasöaife 1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects. 2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge placed into the machine stops. If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up to 70 PAGES on the ADF at one time by setting the documents as stairs shape as the figure below. If you have more than 70 pages, wait until transmission or storing in memory starts as pages feed through, place any remaining pages on top of the last page in the feeder. 3. Adjust the Document Guides to center the document on the ADF. Document Guides INCORRECT When you set a document on the ADF, the display message will change from date and time (standby) to the following message. You can now change basic transmission settings, or begin the dialing procedure. ENTER STATION(S) THEN PRESS START 00% ( NOTE 1 The document limitation to send multiple pages is as follows. Document Size Document Thickness Up to 50 pages Up to 10.1 x 14.3 in (257 x 364 mm) 0.0024 - 0.0048 in Up to 70 pages* A4 or Letter size 0.0024 - 0.0039 in * Please note that although the size and thickness meets the specifications, you might not be able to set 70 pages with some types of papers. 2. Transmitting documents longer than 14 in (356 mm) requires user’s assistance. 3. When transmitting documents longer than Letter size (8.5 x 11 in), please extend the sub-tray as shown below. 41 Basic Operations You can temporarily change the transmission settings either before or after you place the document on the ADF. These settings are as follows • Contrast • Resolution • Halftone • Stamp • Communication Journal After your document(s) have been sent, your machine will automatically return to the preset settings. Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker. Press I CONTRAST! to: a DARKER CD UGHTER CONTRAST CONTRAST = Normal CD DARKER ¿DAUGHTER CONTRAST CONTRAST = Lighter ^...