Log:
Évaluations - 2, GPA: 4 ( )

Instructions Panasonic, Modèle PVDC3000

Fabricant : Panasonic
Taille : 1.48 mb
Nom Fichier : PVDC3000.PDF
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


After capturing an image, the number may not decrease, or it may decrease by two. This is normal. TIFF* (RGB) • TIFF can only be selected in MANUAL REC mode. •TIFF (RGB) images may not be viewable on all computers. • It takes approx. 3 minutes to save image data to the Memory Card. 22 For assistance, please call : 1-800*272-7033. (gSgeKDÛjQ© ttQE)@33 Set Digital Camera to beep (low or high volume), when an imaqe is captured, or set to OFF. Before you begin- Set the POWER Switch to Q (REC), Q (MANUAL REC) or S (PLAY). (See pages 15, 16.) Press MENU to display the MENU screen. 1 Select Button AW4I> • You can select BEEP mode in the REC, MANUAL REC and PLAY mode. •To change settings, repeat these steps. 1 Press A or ▼ to select [¿D BEEP and press ^ or ^ to select one of the three settings below. [ REC mode] [ MANUAL REC mode ] <•>) ED K [ PLAY mode ] REC MENU 3/3 ED K SCT:«* EXIT: MENU PLAY MENU 2/2 ■do) ED K SET:«» EXIT : MENU jg; : Select to turn OFF the beep sound. i(| > : Select to hear a low beep sound. m : Select to hear a loud beep sound. 2 Press MENU to exit. Digital Camera will beep: • When BEEP is set to LOW or HIGH, camera will beep as follows. Once when you press MODE, MENU, or FLASH Buttons, etc. Once when an item is selected in Menu. • Twice when you press SHUTTER half way to adjust focus. • After SHUTTER is pressed, a shutter sound is audible when an image is captured. Etes KteBfeapI When in REC or MANUAL REC mode, you can confirm the last captured image by holding the y button down. After capture, if POWER is switched to OFF or PLAY, the image cannot be viewed. oq miweciRey i ew When in REC or MANUAL REC mode, you can confirm the last captured image at 2X zoom by holding A button down. After capture, if POWER is switched to OFF or PLAY, the image cannot be viewed. 23 (y§© ®o^îaaH§Ê© You may want to brighten or darken the LCD (Liquid Crystal Display) Viewfinder for easier viewing. This adjustment will not affect the captured image brightness. •Before you begin-> Set the POWER Switch to gE (REC), IS& (MANUAL REC) or E (PLAY). (See pages 15, 16.) Press MENU to display the MENU screen. 1,2 Select Button A/V/ 1 Press A or V to select # LCD BRIGHTNESS in the MENU screen. LCD BRIGHTNESS [ PLAY mode ] * REC MENU 2/3 H] cl Us 59 '□□□HDDO T LCD BRIGHTNESS PLAY MENU \n id -□□DHam* * LCD BRIGHTNESS Press <] (-) or > (+) to change the brightness of the LCD Viewfinder; (+) for brighter, (-) for darker. Press MENU to exit. The original BRIGHTNESS will be restored when the Digital Camera is turned off. The brightness level set in this menu is not related to the brightness of the captured image. 24 For assistance, please call : 1-800-272-7033. Ufogfo (gatgaaoQcasl GSfeKCEl] IFIËKlïEBCS ] You can playback recorded images on the LCD Viewfinder. • For images recorded with audio, a ["J3 is displayed on the screen and audio is played back when SHUTTER is pressed. -Before you begin- Set the POWER Switch to H (PLAY). (See page 16.) 2,3 LCD Viewfinder Select Button To adjust volume, press VOL A/V. 1 PUSH SHUTTER TO PL...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories