Évaluations - 4, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
•Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). •When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger. •The time required to fully charge the supplied battery pack from when it is completely discharged at a temperature of 25°C (77°F) is approximately 220 min., and the practical charging time is approximately 160min. Charging may take longer under certain circumstances or conditions. 11Battery charger2Connect the power cord (mains lead). 3To wall outlet (wall socket) Power cord (mains lead) 1Insert the battery pack. Push the back part of the battery pack gently until it clicks into place. CHARGE lampLight on: ChargingLight off: Completed (Practical charge) If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer. 4Insert the charged battery pack. Open the battery/ “Memory Stick Duo” cover. Insert the battery pack while pressing the battery eject leverwith the tip of the battery. Close the battery/ “Memory Stick Duo” cover. Battery eject leverDigital Still CameraOperating InstructionsBefore operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate volume) thoroughly, and retain them for future reference. Refer to “User’s Guide/Troubleshooting” (separate volume) Explains advanced techniques and what to do if you experience trouble with your camera. Read This FirstRead This FirstDSC-T5Checking the accessories suppliedA “Memory Stick Duo” is not supplied. The camera has its own internal memory (32 MB), however, purchase of a “Memory Stick Duo” is recommended for shooting more images. “Memory Stick Duo”: you can use a “Memory Stick Duo” with your camera. “Memory Stick”: you cannot use a “Memory Stick” with your camera. Other memory cards cannot be used. •For details on “Memory Stick Duo” t“User’s Guide/ Troubleshooting”(page93) •Battery charger BC-CS3 (1)•USB, A/V, DC IN cable for multi-use terminal (1) •Power cord (mains lead) (1)•Wrist strap (1) •Rechargeable battery pack NP-FT1 (1)/Battery case (1) •CD-ROM (Cyber-shot application software) (1) •Operating instructions: “Read This First” (this manual) (1) •Operating instructions: “User’s Guide/ Troubleshooting” (1) Notes•Charge the supplied NP-FT1 battery pack before using the camera for the first time. •The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are normal in the manufacturing process and do not affect the recording in any way. •The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc. Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. HookUsing the AC AdaptorYou can connect the camera to a wall outlet (wall socket) using the AC-LS5K AC Adaptor (not supplied).t“User’s Guide/Troubleshooting” (page 15). Refer to the operating instructions supplied with the AC Adaptor. To check the remaining battery timeOpen the lens cover or press POWER button to turn on and check the time on the LCD screen. To remove the battery packOpen the battery/“Memory Stick Duo” cover and slide the battery eject lever in the direction of the arrow. Grasp the edges of the battery pack to pull the battery pack out. To avoid dropping the battery pack, do not hold the camera with the battery slot facing down when the battery eject lever is out. To use your camera abroad — Power sourcesYou can use your camera, the supplied battery charger, and the AC-LS5K AC Adaptor (not supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60Hz. •Do not use an electronic transformer (travel converter), as this may cause a malfunction. •It takes about one minute until the correct battery remaining time appears. •The displayed time remaining may not be correct under certain circumstances.60minRemaining indicatorRemaining timeBattery eject leverTurn the camera on/set the clock221Select .2Open the lens cover or press the POWER button. Lighting3Set the clock with the control button. 1Select the date display format with v/V, then press z. 2Select each item with b/B and set the numeric value withv/V, then press z. 3Select [OK] with B, then press z. •To cancel, select [Cancel] and press z. 2005/:/ 1 11200AMOKCancelClock SetD/M/YM/D/YY/M/...