Évaluations - 3, GPA: 3.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
For Windows 98, Windows 98SE and Windows Me users: 1 Open [Control Panel] from [ My Computer], then double-click [System]. 2 “System properties” is displayed. Click the [Device Manager] tab located at the top. 3 Click [ Sony DSC] in [ Other devices], then click the [Delete (E)] button located at the lower-right corner. For Windows 2000 Professional users: * Log in with the permission of administrator. 1 Open [Control Panel] from [ My Computer], then double-click [System]. 2 “System properties” is displayed. Click the [Hardware] tab located at the top, then click the [Device Manager (D)] button. 3 Click [View] in [Device Manager], then click [Devices by type (E)]. 4 Right-click [ Sony DSC] in [ Other devices], then click [Delete (E)]. 6 After the message appears to verify that you delete the device, click “OK.” 7 Turn off the camera, disconnect the USB cable, and restart the computer. 8 Install the USB driver in the supplied CD-ROM to the computer following the procedure on page 33. Warning and notice messages Various messages appear on the LCD screen. Check the corresponding descriptions in the following list. Message NO MEMORY STICK Meaning No “Memory Stick” has been inserted. SYSTEM ERROR Turn the power off and on again. MEMORY STICK ERROR • The inserted “Memory Stick” cannot be used with your camera, or is damaged. • The “Memory Stick” is not inserted correctly. FORMAT ERROR Failed to format the “Memory Stick.” MEMORY STICK LOCKED The write-protect tab on the “Memory Stick” is set to the LOCK position. NO MEMORY SPACE The capacity of the “Memory Stick” is full, and you cannot record or copy images. NO FILE No image has been recorded on the “Memory Stick.” FILE ERROR An error occurred while playing back the image. FILE PROTECT The image is protected against erasure. for “InfoLITHIUM” battery only The battery is not the “InfoLITHIUM” type. NOT ENOUGH MEMORY The images you want to copy are too big to copy with your camera. COPY ERROR Copying was not performed correctly, or the “Memory Stick” was removed during copying. DIRECTORY ERROR A directory with the same name already exists on the “Memory Stick.” IMAGE SIZE OVER You are playing back an image of a size that cannot be played back with your camera. INVALID OPERATION You are playing back a file that was created on equipment other than your camera. Additional information 89 E Message The battery level is low or zero. Depending on the conditions of use or the type of battery pack, the indicator may flash even though there is still 5 to 10 minutes of remaining battery time left. Meaning LENS CAP ATTACHED The lens cap is still attached to the lens. CANNOT DIVIDE • The file is not long enough to be divided. • The file is not a moving image. The amount of light is not sufficient or the shutter speed is too slow. (Mount the camera on a tripod or otherwise secure the camera in place.) TURN THE POWER OFF AND ON AGAIN A malfunction occurs on the lens. Self-diagnosis display Your camera has a self-diagnosis display. This function displays the camera condition on the LCD screen with a combination of a letter and four digits of numbers. If this occurs, check the following code chart. The code informs you of the camera’s current condition. The last two digits (indicated by ss) will differ depending on the state of the camera. C:32:ss Self-diagnosis display • C:ss:ss You can reverse the camera malfunction yourself. • E:ss:ss Contact your Sony dealer or local authorized Sony service facility. First three digits C:32:ss Cause and/or Corrective Action • There is trouble with your camera’s hardware or zooming function. t Turn the power off and on again. C:13:ss • The camera cannot read or write data on the “Memory Stick.” t Re-insert the “Memory Stick” several times. • An unformatted “Memory Stick” is inserted. t Format the “Memory Stick” (page 76). • The inserted “Memory Stick” cannot be used with your camera, or is damaged. t Insert a new “Memory Stick” (page 17). E:61:ss • A camera malfunction that you cannot reverse has E:91:ss occurred. t Contact your Sony dealer or local authorized Sony service facility and inform them of the 5digit service code. (example: E:61:10) Additional information If you are unable to solve the problem even after trying the corrective actions a few times and when the camera is not reset even if you press the reset button located on the bottom, contact your Sony dealer or local authorized Sony service facility. When a self-diagnosis display appears The error display appears on the display window (page 93). 91 Specifications System Image device 8.93 mm (1/1.8 type) color CCD Lens 3. zoom lens f = 7 – 21 mm (9/32 – 27/32 inches) (34 – 102mm (1 3/8 – 4 1/8 inches) when converted into a 35 mm still camera) F = 2.0 – 2.5 Exposure control Automatic exposure, Shutter speed priority, Aperture priority, Manual exposure White balance Automatic, Indoor, Outdoor, One-push Data system Movie: MPEG1 Still: JPEG, GIF (in TEXT mode, Clip Motion), TIFF Audio with...