Log:
Évaluations - 1, GPA: 3 ( )

Instructions Sony, Modèle DSC-TX20

Fabricant : Sony
Taille : 1.37 mb
Nom Fichier : 4420016121.pdf
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :
Caméras - DSC-TX20 (809.84 kb)bg
Caméras - DSC-TX20 (19.65 mb)plsvhritentresfrdenlhuptskdaficsro

Facilité d'utilisation


x Charging time (Full charge) The charging time is approximately 115 min. using the AC Adaptor (supplied). Note • The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances. GB x Charging by connecting to a computer x Charging by connecting to a computer Note • Note the following points when charging via a computer: – If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not charge for an extended period of time. – Do not turn on/off or restart the computer, or wake the computer to resume from sleep mode when a USB connection has been established between the computer and the camera. The camera may cause a malfunction. Before turning on/off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer. – No guarantees are made for charging using a custom-built computer or a modified computer. GB x Battery life and number of images that can be recorded and played back x Battery life and number of images that can be recorded and played back Number of images Shooting (still images) Approx. 125 min. Approx. 250 images Viewing (still images) Approx. 190 min. Approx. 3800 images Shooting (movies) Approx. 60 min. — Notes • The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use. • The number of images that can be recorded is for shooting under the following conditions: – Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately) – The battery pack is used at an ambient temperature of 25°C (77°F). • The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – [Panel Brightness] is set to [3(Normal)]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies applies shooting under the following conditions: – Movie quality: AVC HD HQ – When continuous shooting ends because of set limits (page 29), press the MOVIE (Movie) button again and continue shooting. Shooting functions such as the zoom do not operate. GB x Supplying power x Supplying power Notes • Power cannot be supplied when the battery pack is not inserted in the camera. • When the camera is connected directly to a computer or to a power outlet using the supplied AC Adaptor, power supply is available only in playback mode. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. • If you connect the camera and a computer using the multi-use terminal USB cable while the camera is in playback mode, the display on the camera will change from the playback screen to the USB connection screen. Press (Playback) button to switch to the playback screen. GB Inserting a memory card (sold separately) Note the notched corner faces correctly. Inserting a memory card (sold separately) Note the notched corner faces correctly. 1 Open the cover. 2 Insert the memory card (sold separately). • With the notched corner facing as illustrated, insert the memory card until it clicks into place. 3 Close the cover. GB x Memory cards that can be used x Memory cards that can be used For still images For movies A Memory Stick PRO Duo a a (Mark2 only) Memory Stick PRO-HG Duo a a Memory Stick Duo a — B Memory Stick Micro (M2) a a (Mark2 only) SD memory card a a (Class 4 or faster) C SDHC memory card a a (Class 4 or faster) SDXC memory card a a (Class 4 or faster) D microSD memory card a a (Class 4 or faster) microSDHC memory card a a (Class 4 or faster) • In this manual, the products in the table are collectively referred to as follows: A: “Memory Stick Duo” media B: “Memory Stick Micro” media C: SD card D: microSD memory card Note • When using “Memory Stick Micro” media or microSD memory cards with this camera, make sure to use with the appropriate adaptor. x To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note • Never remove the memory card/battery pack when the access lamp (page 11) is lit. This may cause damage to data in the memory card/internal memory. GB Setting the clock ON/OFF (Power) Lens cover Setting the clock ON/OFF (Power) Lens cover button 1 Lower the lens cover. The camera is turned on. The power lamp lights up green only when the camera starts up. Date & Time setting is displayed when you turn on the camera for the first time. • You can also turn on the camera by pressing the ON/OFF (Power) button. • It may take t...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories