Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
When multiple images are selected, the edits are applied to all the selected images. The editing data can be saved in a separate file (2-26). The edited images can be transferred to Adobe Photoshop (2-35). Adjusting the White Balance Adjusting the White Balance Editing RAW Images You can adjust the white balance using the mode settings, color temperature settings, color wheel, and click white balance function. 1 1 Click the [White balance] button. . The [White balance adjustment] dialog box appears. . Alternatively, you can display this dialog box by selecting [Adjustment] menu [White balance]. 3 3 2 2 Adjust the white balance by making each setting (2-20 to 2-24). Click the [Close] button. 2 Displaying Images and Performing Basic Edits in the Main 2-19 Editing RAW Images Selecting the White Balance You can select white balance from the list box. Select the white balance. White Balance Details Color Temp. K (Kelvin) Shoot settings To apply the white balance setting used when the shot was taken. — Auto Automatically adjusts the white balance. Approx. 3000 to 7000 Daylight For sunny daylight outdoors. Approx. 5200 Shade For shaded areas outdoors. Approx. 7000 Cloudy For cloudy or hazy days and during sunset. Approx. 6000 Tungsten light For tungsten (light bulb) light. Approx. 3200 Fluorescent light For fluorescent light. Approx. 4000 Flash When flash is used. Approx. 6000 Color temp. You can manually set color temperature for 2800 to 10000K (in 100K increments) (2-21). Approx. 2800 to 10000 Click white balance Displayed for images on which you performed the click white balance. — Editing RAW Images Specifying the Color Temperature You can specify the color temperature in the range of 2800 to 10000K (in 100K increments) to adjust the white balance. 1 1 Select [Color temp.]. 2 2 Adjust an image while viewing it. The adjusted value appears. 2 Displaying Images and Performing Basic Edits in the Main Drag the slider left or right to adjust the color temperature. 2-21 Editing RAW Images Adjusting the Color Wheel You can select a desired color from the color wheel to adjust the white balance. You can also specify the hues in the range of 0 to 359 (in 1-stop increments), and the saturation in the range of 0 to 255 (in 1-stop increments). 1 1 Click the [Tune] button. . The color wheel appears. 2 2 Adjust an image while viewing it. . Drag [ ] to adjust an image. Enter a value in a range of 0 to 359 or click the [] / [] buttons to specify the hues. Enter a value in a range of 0 to 255 or click the [] / [] buttons to specify the saturation. Editing RAW Images Click White Balance Function You can automatically adjust the white balance simply by clicking a point in a neutral part of the image. 1 1 Click the [Click (RAW)] button. . When you move the cursor over the image, the cursor [ ] changes to [ ]. 2 2 Click a point in a neutral part of the image. . If you click on another point over the image, the white balance is adjusted again. . If you finish this operation, click the [Click (RAW)] button. 2 . The coordinates of the cursor position and the RGB values (8-bit conversion) of an image are displayed in the lower-left of the main window (2-2). . The image is adjusted based on the value of 1 1 pixels from the clicked point. . You can also adjust the white balance by clicking an achromatic color (neutral gray) part of the image. Displaying Images and Performing Basic Edits in the Main 2-23 Editing RAW Images Personal White Balance You can apply the personal white balance (3-15) that you registered in the edit window or the edit image window to images. Adjusting the Brightness 321 Click the [1], [2] or [3] button. . The registered personal white balance is applied to the image. You cannot use the personal white balance if you have not registered it. You can adjust the brightness in the range of –2.0 to +2.0 (in one-sixth-stop increments for the slider, and in 0.01-stop increments when entering a value). 1 Click the [Brightness (RAW)] button. . The [Brightness adjustment] dialog box appears. . Alternatively, you can display this dialog box by selecting [Adjustment] menu [Brightness adjustment (RAW)]. 2 Adjust an image while viewing it. Drag the slider left or right to adjust the brightness. Restores the image to its original condition. Enter a value to adjust the brightness. 3 Click the [Close] button. Specifying Color Space Specifying Color Space Editing RAW Images You can apply the color space different from the setting selected when you specify the preferences (2-39), to the selected RAW images. Select [Adjustment] menu . [Work color space] . [sRGB], [Adobe RGB], or [Wide Gamut RGB]. 2 The specified color space is added to the ICC profile that is embedded in TIFF images that have been converted from RAW images and saved (2-30, 2-32). A color space is the reproducible color range (the characteristics of color gamut). Digital Photo Professional supports the color space of sRGB, Adobe RGB, and Wide Gamut RGB. sRGB : Wide...