Évaluations - , GPA: ( )

Instructions Canon, Modèle EOS Rebel K2

Fabricant : Canon
Taille : 3.52 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

It is effective for group photos and landscapes. The camera uses the 7 AF points to detect the nearest and farthest subjects to be in focus. * < A-DEP > stands for Auto-depth of field. Turn the Mode Dial to < A-DEP >. The image was removed due to copyright restrictions Focus the subject. • Move the AF point over the subject and press the shutter button halfway. • Focus is achieved at all the AF point marks that light. Take the picture. M The mode cannot be used if the lens' focus mode switch is set to . S -If the aperture value blinks, it indicates that the exposure level is correct but the desired depth of field cannot be achieved. Either use a wide-angle lens or move further away from the subjects. • In this shooting mode, you cannot freely change the shutter speed and aperture value. If the camera sets a slow shutter speed, hold the camera steady or use a tripod. • If flash is used, the result will be the same as using flash in the

mode. 37 AvE3 Exposure Compensation ■■■■■■■ Exposure compensation is used to alter the camera’s standard exposure setting. You can make the picture look lighter (increased exposure) or darker (decreased exposure). The exposure compensation amount can be set up to +1-2 stops in half-stop increments._ H Turn the Mode Dial to a Creative " Zone mode except < M >. Check the exposure setting. • Press the shutter button halfway and check the display. 3Set the exposure compensation amount. • Hold down the < Av0> button and turn the <£S> dial. • To cancel the exposure compensation, set the exposure compensation amount to . ^ Take the picture. Ul • The exposure compensation amount set is retained even alter the Mode Dial is set to <®0 >. • The exposure compensation amount is canceled automatically when you turn the Mode Dial to a Basic Zone mode. • Assuming that a shutter speed of 1/125 sec. and an aperture value of f/5.6 will give a correct exposure, setting the exposure compensation amount to plus or minus 1 stop will change the shutter speed or aperture value as follows: Decreased Increased exposure exposure Exposure level mark -1 stop «— 0 -> +1 stop Shutter speed 250 <- 125 -> 60 Aperture value 8.0 <- 5.6 -> 4.0 38 % Auto Exposure Bracketing (AEB) mm With AEB, the camera automatically changes the exposure within the set range (up to +/-2 stops in 1/2-stop increments) lor three successive Irames. Move the <►> arrow to the <%> icon. • Look at the LCD panel and press the button. (<2>6) Set the desired AEB amount. • Turn the <£2s> dial. • Press the shutter button halfway to return to normal camera operation. Take the picture. ► The three bracketed shots will be exposed in the following sequence: standard exposure, decreased exposure, and increased exposure. ► As shown on the left, the respective bracketing amount will be displayed as each bracketed shot is taken. • The picture will be taken in the current film advance mode. • After the three AEB shots are taken, the AEB will not be canceled automatically. To cancel AEB, set the AEB amount back to “ 00 ”. lil • During AEB shooting, the <►> arrow will appear next to the <%> icon and the AEB level <■> will be displayed. In the viewfinder, the <*> icon will blink. • In the film advance mode, the camera stops shooting automatically after taking the three AEB shots. In the (single frame) mode, press the shutter button completely three times to take the three AEB shots. • If you use the self-timer or remote control, the three AEB shots will be taken continuously automatically. • AEB can be combined with exposure compensation. • AEB cannot be used with flash or bulb exposures. AE8 amount C“—l RJK ID “ ±j— AEB range standard exposure 2 3 decreased exposure increased exposure 60 s.6t ■ 39 1 *AE Lock —m-mmmm—ammmmmmm AE lock enables you to lock the exposure at a different place from the point of focus. After locking the exposure, you can recompose the shot while maintaining the desired exposure level. This feature is useful for backlit and spotlighted subjects. For AE lock, partial metering is used automatically. Focus the subject. ► The exposure setting will be displayed. Press the <-X-> button. < button. ► The <*> icon will light in the viewfinder to indicate that the exposure setting has been locked (AE lock). • Each time you press the <*> button, it locks the current exposure setting. The image was removed due to copyright restrictions The image was removed due to copyright restrictions Compose the shot and take the picture. • If you want to maintain the AE lock while taking more pictures, hold down the <*> button and press the shutter button to take another picture. 40 Bulb Exposures When bulb is set, the shutter is open during the time you keep pressing the shutter button fully. Bulb exposures are useful when long ex...