Évaluations - 3, GPA: 4 ( )

Fabricant : Canon Taille : 4.7 mb Nom Fichier : Langue d'enseignement:

Par ce dispositif a également d'autres instructions :

Caméras - Speedlite 430EX (6.38 mb)

When the Speedlite is attached to a compatible camera, will appear on the Speedlite’s LCD panel. About Color Temperature Information Transmission When the flash fires, the color temperature information is transmitted to certain specific EOS digital camera. This feature optimizes the flash picture’s white balance. When the camera’s color balance is set to or , it will work automatically. To see if this feature works with your camera, see the “White Balance” specification in the “Specifications” of your camera’s instruction manual. Reverting to 430EX Default Settings When 430EX is attached to an EOS camera equipped with a button, you can press it to revert the 430EX’s settings (except Custom Functions) to the default. About the AF-Assist Beam Under low-light or low-contrast conditions, the built-in AF-assist beam will be emitted automatically to make it eaasier to autofocus. The 430EX’s AF-assist beam is compatible with the AF points of almost all EOS cameras. The AF-assist beam is compatible with 28mm and longer lenses. The effective range is shown below. Position Effective Range (m / ft) Center Approx. 0.7 - 10 / 2.3 - 32.8 Periphery Approx. 0.7 - 5 / 2.3 - 16.4 Wireless Flash Wireless Flash...................................................... 24 Setting Manual Flash with the Slave Unit............. 29 Wireless Flash With multiple Canon Speedlites having the wireless flash feature, you can create various lighting effects with the same ease as using normal E-TTL II autoflash. The settings you input with the master unit attached to the camera are also transmitted to the slave unit(s) controlled by wireless. Therefore, you need not operate the slave unit(s) at all during the shoot. For details on wireless flash photography and operating the master unit, see the master unit’s instruction manual. The procedure below applies to a master unit attached to the camera and slave unit(s) controlled by wireless. 1 Set the master unit. ..Attach Speedlite 580EX, 550EX, STE2, MR-14EX or MT-24EX to the camera and set it as necessary. 2 Set the 430EX as the slave unit. ..Set the wireless selector to . 3 Check the communication channel. ..If the master unit and slave unit(s) are set to a different channel, set them all to the same channel (p.27). 4 Set the slave ID. ..Set the slave ID when using two (A and B) or three (A, B, and C) slave groups (p.28). 5 Position the camera and Speedlites as desired. ..Position the slave unit(s) within the master unit's wireless transmission range. 6 Set the master unit’s flash mode to . ..The slave unit(s) will also be automatically set to . 7 Check that the flash is ready. ..When the slave unit is ready to fire, the AF-assist beam will blink once each second. 8 Check the flash operation. ..Press the master unit’s test firing button. • The slave unit will fire. If the flash does not fire, adjust the slave unit’s angle toward the master unit and distance from the master unit. 9 Set the camera and shoot. ..Set the camera in the same way as with normal flash shooting. Sample wireless flash setup Indoors Outdoors Master unit 80° 8m (26.2ft.) 12m (39.4ft.) Slave A Slave B ..Use the mini stand (tripod socket provided) to prop up the slave unit. ..Use the bounce feature to swing the slave unit’s flash body so that the wireless sensor faces the master unit. ..Indoors, the wireless signal may also bounce off the wall so there is more leeway in positioning the slave unit(s). ..After positioning the slave unit(s), be sure to test the wireless operation before shooting. ..Do not place any obstacles between the master unit and slave unit(s). Obstacles can block the transmission of wireless signals. ..Even with multiple slave units, all of them will be controlled in the same way via wireless. ..The Speedlite’s zoom setting will be set automatically to 24mm. It is possible to change the master unit’s zoom setting. However, note that the master unit transmits wireless signals to the slave unit(s) with the preflash. Therefore, the flash coverage must cover the slave unit’s position. If you change the master unit’s zoom setting, be sure to test the wireless operation before shooting. ..If the slave unit enters auto power off, it can be turned on again by pressing the master unit’s test firing button. ..If the 430EX is set as a slave unit and remains in auto power off mode for more than 8 hours, it will not turn on even if you try to fire a test flash with the master unit. In this case, press the slave unit’s test firing button to turn it on. ..A test flash cannot be fired while the camera’s operation timer 4or 0 is active. Using Fully Automatic Wireless Flash Flash exposure compensation and other settings set with the master unit will also be automatically set in the slave units. Thus, you need not make settings on the slave unit(s). Wireless flash with the following settings can be done in the same way as with normal flash shooting. • Flash exposure compensation • FEB • High-speed sy...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :