Évaluations - 2, GPA: 3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
You can shoot with this feature to minimize the effects of camera movement when shooting with optical anti shake does not produce the desired results. 1. Press [BS] and then select “High Speed Anti Shake”. 2. When you are ready to shoot, press the shutter button. • After you press the shutter button, the message “Busy... Please wait...” will appear on the monitor screen to indicate that recording is in progress. Keep the camera still while this message is displayed. The recording process takes some time to complete after the message appears. NOTE • This BEST SHOT scene saves only a single final image. • To cancel this BEST SHOT scene and enter the Continuous Shutter mode, press C (Continuous Shutter). • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • High Speed Anti Shake will not operate correctly while the camera is mounted on a tripod. • High Speed Anti Shake may not operate properly resulting in blurred images if the camera is moved more than the allowable range or if the subject moves during shooting. Using BEST SHOT 71 Isolating Moving Subjects (Multi-motion image) Isolating Moving Subjects (Multi-motion image) Multi-motion image can be used to isolate a moving subject within a series of multiple images and place them against a stationary background. Use a tripod or some other means to make sure that the camera is not moving or shaking when shooting with Multi-motion image. Basic Multi-motion image Procedure 1. Press [BS] and then select “Multi-motion Image”. 2. Hold down the shutter button to record. 3. Release the shutter button. Continuous Shutter shooting will stop and the resulting composite image will appear on the monitor screen. • The above procedure shoots multiple images and combines them automatically into a final image. Do not move the camera until shooting is complete. • You can configure the maximum number of CS shots, the CS fps, and Prerecord CS shots settings the same way as you configure the High Speed CS setting (page 51). Note, however, that the maximum number of CS shots for “Multi-motion Image” is 28 instead of 30. Using BEST SHOT 72 NOTE • This BEST SHOT scene saves only a single final image. • To cancel this BEST SHOT scene and enter the Continuous Shutter mode, press C (Continuous Shutter). • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • Shooting with “Multi-motion Image” assumes that the subject is moving and changing positions. Trying to use it to shoot a subject that is moving while maintaining the same location (such as a golf swing, a baseball swing, etc.) will cause an error message to appear on the monitor screen and failure of image recording, or will produce an image in which the shots of the subject are arranged incorrectly. • Multi-motion will not operate correctly if you shake or move the camera along with the movement of the subject. • If an error message appears on the monitor screen, either secure the camera so it does not move or shoot against a different type of background. • If not enough CS images are recorded, an error will be displayed before the camera starts to place the isolated subject onto the stationary background. This can be caused if you release the shutter button too soon when recording the moving subject. Keep the shutter button fully depressed long enough to allow recording of more images. • Choose a shooting angle so the colors, shapes, and patterns of the moving subject and the background are as different as possible. • Avoid a shooting angle where the background is monotone or mono-pattern (such as a clear blue sky). • The camera may not be able to compose the final image if the intervals between movements are so narrow the subject shots overlap. If this happens, increase the interval by using the control panel to select a slower “High-speed CS fps” setting (page 51). Using BEST SHOT 73 Shooting with Priority on Subject Faces (High Speed Best Selection) Shooting with Priority on Subject Faces (High Speed Best Selection) With High Speed Best Selection, the camera automatically shoots a series of images, and selects the best one based on facial image blur, and facial expression (whether the subject is smiling or blinking). 1. Press [BS] and then select the “High Speed Best Selection” scene. 2. Press the shutter button to shoot. • This will cause the message “Busy... Please wait...” to appear. Do not move the camera while this message is displayed. The recording process takes some time to complete after the message appears. NOTE • This BEST SHOT scene saves only a single final image. • To cancel this BEST SHOT scene and enter the Continuous Shutter mode, press C (Continuous Shutter). • If one or more of the faces are blurred in all of the images that are shot, they will be blurred in the final image as well. • The following conditions may make it impossible for the camera to determine if the subject is blinking or smiling. This may result in a final image in which the sub...