Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
The “Lag Correction” feature lets you configure the camera to lessen or even eliminate this lag to help you better time your shots and get exactly the moment you want. With “Lag Correction”, you half-press the shutter button and compose the image you want to shoot. Then when you full-press the shutter button, the camera pre-records a total of five images, including four images of action that happened before you fully pressed the shutter button. After that, you can view the images on the monitor screen and select the one you want to keep. 1. In the REC mode, press [BS]. 2. Select “Lag Correction” and then press [SET]. 3. With the camera pointed at the subject, half-press and hold the shutter button. The camera will start pre-recording images at this time. • If you release the half-pressed shutter button before pressing it the rest of the way down, all of the pre-recorded images currently in the buffer will be deleted. 4. When you are ready to shoot, press the shutter button all the way down. After pre-recording is complete, one of the five images will appear on the monitor screen for about three seconds. 5. If you want to view all five of the pre-recorded images, press [SET] within about three seconds after a recorded image appears on the monitor screen. • If you do not press [SET] within three seconds, the image displayed in step 4 will be saved automatically as the final image. Using BEST SHOT 79 6. Use [4] and [6] to scroll through the pre-recorded images on the monitor screen. Use [4] and [6] to scroll through the pre-recorded images. Each image appears, along with an indication of the timing when it was pre-recorded. –0.4 sec. –0.3 sec. –0.2 sec. –0.1 sec. SHUTTER (0.4*) (0.3*) (0.2*) (0.1*) (Full-press) * Seconds prior to full-press of shutter button. • The timing of the image you select here will be the timing of the image displayed first in step 4 the next time you perform the above procedure. If you select the image that was pre-recorded 0.3 seconds prior to full-press of the shutter button, for example, the –0.3-second image will be displayed in step 4 the next time you perform the above procedure. 7. To save the currently displayed image as the final images, press [SET]. NOTE • The current mode dial setting is ignored when recording with this BEST SHOT scene. • With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off). • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • The Self-timer cannot be used with this BEST SHOT scene. • With this BEST SHOT scene, half-pressing the shutter button fixes focus and exposure at their current levels. • With this BEST SHOT scene, image recording will not be successful if you full-press the shutter button without allowing enough time (at least 0.4 seconds) after half-pressing it. • Pay close attention to the subject when shooting. Failure to do so can cause considerable lag from the instant you want to shoot until you actually full-press the shutter button. This can cause image recording to be too late, even if you use this function. • The current “Review” setting (page 100) is ignored when shooting with this function. Immediately after you full-press the shutter button, one of the five pre-recorded images will appear on the display as in step 4 of the above procedure. Using BEST SHOT 80 Isolating Moving Subjects (Multi-motion image) Isolating Moving Subjects (Multi-motion image) Multi-motion image can be used to isolate a moving subject within a series of multiple images and place them against a stationary background. Use a tripod or some other means to make sure that the camera is not moving or shaking when shooting with Multi-motion image. Basic Multi-motion image Procedure 1. In the REC mode, press [BS]. 2. Select “Multi-motion Image” and then press [SET]. 3. Hold down the shutter button to record. 4. Release the shutter button. Continuous Shutter shooting will stop and the resulting composite image will appear on the monitor screen. • The above procedure shoots multiple images and combines them automatically into a final image. Do not move the camera until shooting is complete. • You can configure the maximum number of CS shots, the CS fps, and Prerecord CS shots settings the same way as you configure the High Speed CS setting (page 58). Note, however, that the maximum number of CS shots for “Multi-motion Image” is 28 instead of 30. NOTE • The current mode dial setting is ignored when recording with this BEST SHOT scene. • With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off). • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • The Self-timer cannot be used with this BEST SHOT scene. • Shooting with “Multi-motion Image” assumes that the subject is moving and changing positions. Trying to use it to shoot a subject that is moving while maintaining the same location (such as a golf swing, a baseball swing, etc.) will cause an error message to app...