Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
Note that you cannot edit the following types of imagess. •Images created with MOTION PRINT •Movies •Images recorded with another camera Problem Possible Causes and Action APPENDIX 283 Other The wrong date and time are displayed. Other The wrong date and time are displayed. The date and time setting is off. Set the correct date and time (page 202). The messages on the display are in the wrong language. The wrong display language is selected. Change the display language setting (page 206). I can’t transfer images over a USB connection. 1) The USB cable may not be connected securely. Check all connections. 2) If your computer is running Windows 98SE or 98, the USB driver may not be installed. Install the USB driver (page 225), which you can download from the official EXILIM Website at 3) If your computer is running Windows 98SE or 98, the USB driver may be installed incorrectly. Reinstall the USB driver correctly (page 225). 4) The wrong USB communication protocol may be selected. Select the correct USB communication protocol in accordance with the type of device you are connecting (page 207). 5) If the camera is not turned on, turn it on. Display language setting screen appears when the camera is turned on. 1) You did not configure initial settings after purchasing the camera or the battery may have been left with a dead battery. Check the camera setup (pages 11, 206). 2) The may be a problem with the camera’s built-in memory management area. If this is the case, perform the reset operation to initialize the camera’s setup (page 150). After that, configure each setting. If the language selection screen does not re-appear when you turn the camera on, it means that the camera’s built-in memory management area has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO service center. Problem Possible Causes and Action APPENDIX 284 Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again. • Any of the following may occur after the “ALERT” message appears. 1) Power turns off. 2) Movie recording is impossible or movie length is limited. 3) Monitor screen brightness setting changes to 0. Battery is low. Battery power is low. Cannot correct image! Keystone correction of the image cannot be performed for some reason. The image will be stored as-is, without correction (page 113). Cannot find the file. The image you specified with the slideshow “Images” setting cannot be found. Change the “Images” setting (page 156) and try again. Cannot register • You are attempting to save a BEST SHOT any more files. scene when there are already 999 scenes in the “SCENE” folder (page 108). • You are attempting to copy a FAVORITE file when the “FAVORITE” folder already contains 9999 files (page 192). Card ERROR There is something wrong with the memory card. Turn off the camera, remove the memory card, and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 50). • Formatting the memory card deletes all its files. Before formatting, try transferring recoverable files to a computer or some other storage device. IMPORTANT! Check • You are attempting to connect the camera connections! to a printer while the camera’s USB settings are not compatible with the USB system of the printer (page 212). • If your computer is running Windows 98SE or 98, the USB driver may not be installed (page 225). Files could not Battery power is low, so an image file could not be saved be saved. because battery is low. Folder cannot be You are trying to record a file while there are created. already 9,999 files stored in the 999th folder. If you want to record more, delete files you no longer need (page 196). LENS ERROR This message appears and the camera turns off whenever lens performs some unexpected operation. If the same message appears after you turn power back on, contact your retailer or a CASIO service center. APPENDIX B 285 Load paper! The printer ran out of paper while printing. Memory Full Memory is full with images you recorded and/ or of files saved by editing operations. Delete files you no longer need (page 196). No Favorites file! The FAVORITE folder does not contain any files. Printing Error An error occurred while printing. • The printer is turned off. • The printer generated an error, etc. Record Error Image compression could not be performed for some reason during image data storage. Shoot the image again. Replenish ink! During printing, the printer is running low on ink or is out of ink. RETRY POWER ON If the lens comes into contact with some obstacle, this message appears and the camera turns off. Take action to remove the obstacle, and try turning on power again. SYSTEM ERROR Your camera system is corrupted. Contact your retailer or an authorized CASIO service ce...